{"id":5360,"date":"2026-11-11T18:28:49","date_gmt":"2026-11-12T02:28:49","guid":{"rendered":"https:\/\/www.26yc.com\/iso-16890-ed2-spec-transition\/"},"modified":"2026-11-11T18:28:49","modified_gmt":"2026-11-12T02:28:49","slug":"iso-16890-ed2-spec-transition","status":"publish","type":"post","link":"https:\/\/www.26yc.com\/de\/iso-16890-ed2-spec-transition\/","title":{"rendered":"ISO 16890-1 Edition 2 Is at the Printers. Do Not Rewrite Your Filter Schedule Yet."},"content":{"rendered":"<h1>ISO 16890-1 Edition 2 Is at the Printers. Do Not Rewrite Your Filter Schedule Yet.<\/h1>\n<p>The ISO catalogue moved ISO 16890-1 Edition 2 to stage 60.00 \u2014 &#8220;International Standard under publication&#8221; \u2014 on <strong>17 October 2026<\/strong>. It will replace the 2016 edition. That is a real milestone, and it is also the point at which purchasing departments tend to do something unnecessary: delete every F-class from their filter schedule overnight.<\/p>\n<p>Here is what is reasonably settled and what is not. The ePM1 \/ ePM2.5 \/ ePM10 classification system survives; the revision tightens test-method detail and draws a cleaner boundary with ISO 29463, which covers the higher-efficiency HEPA\/ULPA side. The 2016 text already states, plainly, that laboratory results cannot by themselves predict in-service efficiency or lifetime. That sentence is the most useful line in the standard for a specifier, and it is routinely ignored.<\/p>\n<h2>The mapping problem nobody budgets for<\/h2>\n<p>EN 779&#8217;s G and F classes and ISO 16890&#8217;s ePM classes are not a conversion. F7 was a broad bucket defined against a 0.4 \u00b5m average synthetic dust efficiency; ePM1 is a fractional efficiency against a defined PM1 aerosol, reported after a conditioning step. Two filters both sold as &#8220;F7 equivalent&#8221; can land on opposite sides of an ePM1 50% threshold. We have seen schedules where a straight substitution changed the actual particulate protection of a cleanroom make-up air unit without anyone noticing.<\/p>\n<table>\n<thead>\n<tr>\n<th>Schedule line (old)<\/th>\n<th>What to ask for during the transition<\/th>\n<th>Warum?<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>G4 pre-filter<\/td>\n<td>Coarse grade per ISO 16890 plus a declared initial and final pressure drop<\/td>\n<td>Pre-filters are bought for loading behaviour, not fine-particle efficiency<\/td>\n<\/tr>\n<tr>\n<td>F7 \/ F9 medium filter<\/td>\n<td>ePM1 value at the project airflow, with the test report attached<\/td>\n<td>The letter hides the fractional efficiency<\/td>\n<\/tr>\n<tr>\n<td>H13 \/ H14 HEPA<\/td>\n<td>ISO 29463 or EN 1822 classification and a local leak-scan report<\/td>\n<td>Different standard family, different test<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Our recommendation for the next six months is dull: dual-label. Keep the legacy class in brackets so existing maintenance contracts still make sense, and put the ePM value next to it. Then re-tender on the new basis once the published text and the manufacturers&#8217; re-rated datasheets are both in hand. We would not accept a bid where the vendor has simply crossed out &#8220;F7&#8221; and typed &#8220;ePM1 60%&#8221; without a current test report.<\/p>\n<figure><img decoding=\"async\" src=\"https:\/\/www.26yc.com\/wp-content\/uploads\/2026\/11\/iso-16890-ed2-spec-transition.svg\" alt=\"Timeline of ISO 16890-1 Edition 2 publication stages with a dual-label transition window for filter schedules\" style=\"max-width:100%;height:auto;border:1px solid #e6ebef;border-radius:8px;\" \/><figcaption>Stage 60.00 is not the same as &#8220;in force in your supply chain&#8221;. Dual-label until datasheets catch up.<\/figcaption><\/figure>\n<h2>The part that actually changes energy use<\/h2>\n<p>A filter&#8217;s efficiency class does not tell you its pressure drop at your face velocity, and pressure drop is what the fan pays for. At 3,400 m3\/h through a single 610 x 610 mm face (0.372 m2), velocity is 2.54 m\/s \u2014 inside the standard&#8217;s test range but at the upper end of what we like to see in a commercial AHU. Split that across two 610 x 610 cells and velocity halves to 1.27 m\/s. With a pressure-drop exponent around 1.7 (an empirical figure; measure it, do not quote us on it), a 120 Pa filter would land near 37 Pa. Same media, same efficiency class, roughly a third of the resistance.<\/p>\n<p>That is why our filter enquiries ask for the <em>rated airflow<\/em> alongside the class. The <a href=\"\/de\/primary-vs-medium-vs-high-efficiency-filters-comparison\/\">three-stage filter comparison<\/a> and the <a href=\"\/de\/air-filter-maintenance-replacement-pressure-drop\/\">pressure-drop and replacement guide<\/a> go into the maintenance consequences; <a href=\"\/de\/air-filter-efficiency-classes-g-f-h-explained\/\">the efficiency-class explainer<\/a> is where we keep the legacy-to-ePM mapping.<\/p>\n<h2>Where filters meet the recovery core<\/h2>\n<p>One reason we care about this on a heat-recovery site: whatever passes the pre-filter ends up on the exhaust face of the core. A cheap pre-filter changed on a calendar instead of on differential pressure can cost more in core cleaning than the entire filter budget. We wrote that calculation out in <a href=\"\/de\/plate-heat-exchanger-cleaning-maintenance\/\">plate exchanger cleaning and maintenance<\/a>, and the <a href=\"\/de\/face-velocity-definition\/\">face velocity explainer<\/a> shows why the same filter behaves differently at two airflows.<\/p>\n<p>For HEPA stages, the separate question of MPPS and leak testing is covered in <a href=\"\/de\/hepa-ulpa-filters-h10-h14-specifications\/\">HEPA\/ULPA selection<\/a>.<\/p>","protected":false},"excerpt":{"rendered":"<p>The ePM system survives. The mapping problem is what nobody budgets for.<\/p>","protected":false},"author":0,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[109],"tags":[],"class_list":["post-5360","post","type-post","status-publish","format-standard","hentry","category-filter"],"_links":{"self":[{"href":"https:\/\/www.26yc.com\/de\/wp-json\/wp\/v2\/posts\/5360","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.26yc.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.26yc.com\/de\/wp-json\/wp\/v2\/types\/post"}],"replies":[{"embeddable":true,"href":"https:\/\/www.26yc.com\/de\/wp-json\/wp\/v2\/comments?post=5360"}],"version-history":[{"count":0,"href":"https:\/\/www.26yc.com\/de\/wp-json\/wp\/v2\/posts\/5360\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.26yc.com\/de\/wp-json\/wp\/v2\/media?parent=5360"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.26yc.com\/de\/wp-json\/wp\/v2\/categories?post=5360"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.26yc.com\/de\/wp-json\/wp\/v2\/tags?post=5360"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}