EU F-Gas 2024/573: Low-GWP Refrigerants

Regulation (EU) 2024/573

The EU F-Gas Regulation 2024/573 entered into force on 11 March 2024, repealing 517/2014. It drives HFC availability to zero by 2050 through a tightening CO2-equivalent quota schedule, high-GWP refrigerants consume quota faster, pushing the market to low-GWP alternatives.

Key Placing-on-Market Bans

Equipment Ban Date
Single splits under 3 kg GWP 750 or more 1 Jan 2025
Self-contained AC or HP up to 12 kW GWP 150 or more 1 Jan 2027
Split air-to-water or split AC up to 12 kW GWP 150 or more 1 Jan 2027
Split air-to-air AC or HP up to 12 kW GWP 150 or more 1 Jan 2029
All F-gas in self-contained units Any F-gas (safety exception) 1 Jan 2032

Low-GWP Alternatives

  • R-290 propane, GWP 3 y R-744 CO2, GWP 1, near-zero GWP, with flammable or high-pressure care needed.
  • R-32, GWP 675, A2L y R-454B, A2L, mildly flammable transitions from R-410A.
  • HFO blends, note the parallel EU PFAS restriction debate may affect some HFOs.

Leak-check duties tighten, 5 t CO2e every 12 months, 50 t every 6 months, 500 t every 3 months with detection. For owners, refrigerant choice directly shapes both operational carbon y embodied carbon of HVAC plant.

For specifiers, the regulation shifts the default toward lower-GWP refrigerants and makes leak management a compliance obligation rather than best practice. Equipment using R-290 or R-744 needs careful charge limits and ventilation design because of flammability or high pressure, so component selection and installation standards matter more than before. The phase-down also affects spare-part availability: as high-GWP charges leave the market, older systems become harder to service, which favors planning replacements on a defined schedule. Heat-recovery and heat-pump loops should be specified with the refrigerant decision made up front, because the exchanger and circuit design depend on the working fluid’s properties. Owners who track refrigerant inventory against the new leak-check thresholds avoid penalties and keep embodied-carbon reporting accurate.

Preguntas frecuentes

What does EU F-Gas Regulation 2024/573 change?
It repeals Regulation 517/2014 and drives HFC availability toward zero by 2050 through a tightening CO2-equivalent quota schedule that penalizes high-GWP refrigerants.

Which refrigerants are affected by the 2024 bans?
Placing-on-market bans phase out high-GWP equipment such as single splits above GWP 750 from 2025 and many split systems above GWP 150 from 2027 to 2029, pushing R-290, R-744, R-32, and R-454B.

What are the leak-check duties under the new F-Gas rules?
Leak-check frequency tightens to every 12 months above 5 tonnes CO2e, every 6 months above 50 tonnes, and every 3 months above 500 tonnes, with detection systems required at the highest thresholds.

How does refrigerant choice affect HVAC carbon accounting?
Because leakage is a high-GWP Scope 3 hotspot, choosing low-GWP charges and disciplined leak-testing materially lowers both operational and embodied carbon reporting.

Preguntas frecuentes

What does EU F-Gas Regulation 2024/573 change?

It repeals Regulation 517/2014 and drives HFC availability toward zero by 2050 through a tightening CO2-equivalent quota schedule that penalizes high-GWP refrigerants.

Which refrigerants are affected by the 2024 bans?

Placing-on-market bans phase out high-GWP equipment such as single splits above GWP 750 from 2025 and many split systems above GWP 150 from 2027 to 2029, pushing R-290, R-744, R-32, and R-454B.

What are the leak-check duties under the new F-Gas rules?

Leak-check frequency tightens to every 12 months above 5 tonnes CO2e, every 6 months above 50 tonnes, and every 3 months above 500 tonnes, with detection systems required at the highest thresholds.

How does refrigerant choice affect HVAC carbon accounting?

Because leakage is a high-GWP Scope 3 hotspot, choosing low-GWP charges and disciplined leak-testing materially lowers both operational and embodied carbon reporting.

Especifique el intercambiador adecuado

Nuestros ingenieros dimensionan el núcleo según su caudal, temperatura y presupuesto de caída de presión, y seleccionan recuperación por placa, rotativa o caloduc según la aplicación. Lea la guía del intercambiador , o contáctenos para una especificación.

Solicitar cotización

Productos relacionados

Air-to-Air Heat Exchanger

Recuperación por placa, rotativa o caloduc para HVAC y ventilación.

Plate Heat Exchanger

Núcleos estacionarios de gran superficie para aire y líquido.

rueda de recuperación rotativa

Recuperación de energía de alta eficacia para grandes caudales.

Heat Pipe Heat Exchanger

Corrientes pasivas y totalmente separadas para aplicaciones limpias.

Publicaciones relacionadas

Empieza a escribir tu término de búsqueda arriba y pulsa Intro para buscar. Pulsa Esc para cancelar.

Volver arriba
Calculadoras gratuitas de recuperación de calor y herramientas de dimensionamiento