The 3060 Commitments China has pledged to peak carbon dioxide emissions before 2030 and achieve carbon neutrality before 2060 (the 'Dual Carbon' or 3060 goals). Meeting them hinges on industrial energy efficiency - and waste-heat / recovery equipment sits squarely in the toolbox. Key Policy Documents 2024-2025 Energy Conservation and Carbon Reduction Action Plan (State […]
Thermal Comfort and Heat Recovery: ASHRAE 55 and IEQ
ASHRAE 55 and Thermal Comfort ASHRAE 55 defines acceptable thermal environments through the PMV or PPD model, balancing air temperature, mean radiant temperature, humidity, air speed and clothing. Heat recovery changes supply-air conditions, so it must be designed without degrading comfort. Humidity and IEQ Enthalpy recovery transfers moisture as well as heat, helping hold indoor […]
California Title 24 Heat Recovery
California Title 24, Part 6 (the Building Energy Efficiency Standards) is the most aggressive state energy code in the U.S., and its 2022 edition — effective 1 January 2023, with a July 2024 Supplement — puts heat recovery at the center of both nonresidential and multifamily compliance. This article distills the recovery provisions that trigger […]
Heat Recovery Standards and Certifications
When you specify or buy a heat recovery unit, third-party standards tell you the numbers are comparable and real. Knowing the key marks helps avoid inflated claims. Testing Standards AHRI 1060: North American rating method for air-to-air heat exchangers. EN 308: European test method for heat transfer in recovery components. ISO 16494: International method for […]
Heat Recovery Efficiency Metrics Explained
When comparing heat recovery products, efficiency numbers can be confusing. Manufacturers may quote temperature effectiveness, sensible recovery efficiency, or total energy recovery. Understanding these metrics helps you make fair comparisons and avoid under- or over-sizing equipment. Temperature Effectiveness (Sensible) Sensible effectiveness is the most common metric for air-to-air heat exchangers. It compares the actual temperature […]
Building Performance Standards Carbon
Building Performance Standards (BPS) are laws that cap a building’s greenhouse-gas emissions and tighten the cap over time, with penalties for exceeding it. The flagship is New York City’s Local Law 97 (LL97) of 2019; this article summarizes how it works and the role of heat recovery in compliance. NYC Local Law 97 — Scope […]
IECC Energy Recovery Provisions
The International Energy Conservation Code (IECC) is updated on a three-year cycle (2018, 2021, 2024) and is adopted — with or without amendments — by most U.S. states. Its commercial energy-recovery rule lives in Section C403.7, and it is the baseline that many state codes reference. This article summarizes the C403.7 trigger and how the […]
Building Code Heat Recovery Mandate
Across jurisdictions, building codes increasingly mandate energy recovery once a system serves enough outdoor air. This overview compares the main regimes so a designer can specify one core that clears them all. Minimum Effectiveness by Regime Regime Trigger Minimum recovery ASHRAE 90.1-2022 (US) ≥ 5,000 CFM and ≥ 70% OA 50% enthalpy (AHRI 1060) IECC […]
EU F-Gas Regulation 2024/573: Refrigerant Phase-Down and Low-GWP Alternatives
Regulation (EU) 2024/573 The EU F-Gas Regulation 2024/573 entered into force on 11 March 2024, repealing 517/2014. It drives HFC availability to zero by 2050 through a tightening CO2-equivalent quota schedule, high-GWP refrigerants consume quota faster, pushing the market to low-GWP alternatives. Key Placing-on-Market Bans Equipment Ban Date Single splits under 3 kg GWP 750 […]
IECC 2024: Energy Recovery Ventilation Provisions Explained
IECC 2024 and the Energy Recovery Link The 2024 International Energy Conservation Code (IECC) addresses commercial ventilation largely by reference to ASHRAE 62.1-2022. Because 62.1 already requires energy recovery on many large outdoor-air systems, IECC 2024 indirectly tightens ERV expectations, in Climate Zones 4 to 8 an energy recovery ventilator is commonly required where a […]