Definition
The outdoor-air ratio (OAR) is the share of supply air that is genuinely fresh outdoor air:
OAR = outdoor_air_flow / total_supply_air_flow
A space with no recirculation runs at OAR = 1 (100% outside air).
Where OAR is forced to 1
Some spaces cannot recirculate for safety or code reasons:
- Cleanrooms and graded pharmaceutical suites
- Pharmaceutical exhaust
- Laboratories with hazardous vapours
- Kitchens and toilet exhaust
With OAR = 1 there is no return air to blend with, so every joule of condition is spent on outdoor air – and every joule of exhaust is pure recoverable energy.
The recovery implication
Because all supply must be conditioned from outdoor state, an núcleo de recuperación AHU in a 100% OA system delivers the largest percentage saving of any configuration. This is why recovery is effectively mandatory in high-OAR designs under energy codes.
Frequently asked questions
Does recirculation remove the need for recovery? No, but it reduces the outdoor fraction, so savings are smaller; recovery still helps the OA part.
Can OAR exceed 1? Only transiently (economiser boost); the steady design value is between 0 and 1.
Need help specifying the right air-to-air heat recovery for your project? Contact the QIYU engineering team – WhatsApp +86 157 5335 5505, or email kuns913@gmail.com.
Preguntas frecuentes
What is outdoor air ratio?
It is the fraction of supply air that is fresh outdoor air versus recirculated; 100 percent outdoor-air systems bring in no return air to mix.
Why do 100 percent outdoor-air systems need recovery most?
With no recirculation there is nothing to temper the incoming air internally, so an energy recovery wheel or plate exchanger is the main way to cut the heating and cooling load.
Preguntas frecuentes
What is outdoor air ratio?
It is the fraction of supply air that is fresh outdoor air versus recirculated; 100 percent outdoor-air systems bring in no return air to mix.
Why do 100 percent outdoor-air systems need recovery most?
With no recirculation there is nothing to temper the incoming air internally, so an energy recovery wheel or plate exchanger is the main way to cut the heating and cooling load.
Especifique el intercambiador adecuado
Nuestros ingenieros dimensionan el núcleo según su caudal, temperatura y presupuesto de caída de presión, y seleccionan recuperación por placa, rotativa o caloduc según la aplicación. Lea la guía del intercambiador , o contáctenos para una especificación.
Productos relacionados
Recuperación por placa, rotativa o caloduc para HVAC y ventilación.
Núcleos estacionarios de gran superficie para aire y líquido.
Recuperación de energía de alta eficacia para grandes caudales.
Corrientes pasivas y totalmente separadas para aplicaciones limpias.