What Is VRF Heat Recovery
Variable Refrigerant Flow (VRF) heat recovery systems use a single refrigerant loop with branch selector boxes to deliver simultaneous heating and cooling to different zones. Recovered heat from cooling zones is redirected to zones calling for heat, reducing the building net energy use.
Heat Recovery vs Heat Pump VRF
Two-pipe heat-pump VRF can only heat or cool at one time; three-pipe heat-recovery VRF does both simultaneously. The latter is ideal for mixed-use buildings such as offices, hotels and clinics, where perimeter zones need heat while interior cores need cooling.
Where Air-to-Air Recovery Complements VRF
VRF recovers thermal energy between zones, but it does not bring in fresh outdoor air. Pairing VRF with a dedicated outdoor-air unit fitted with a 26YC air-to-air plate exchanger delivers code-compliant ventilation without reheating the entire supply stream.
Selection Notes
Size branch circuitry for worst-case simultaneous load, verify refrigerant line lengths against manufacturer limits, and plan for heat-recovery-mode defrost cycles in cold climates.
From an energy standpoint, three-pipe heat-recovery VRF is most valuable where simultaneous heating and cooling loads are frequent, such as perimeter-and-core office floors or hotels with varying occupancy. The recovered heat stays inside the building instead of being rejected outdoors, which can lower the peak plant size and the associated distribution losses. Integration with a dedicated outdoor-air system keeps indoor air quality and code compliance independent of the refrigerant zoning. Controls should coordinate the branch selectors and the outdoor unit to avoid hunting, and designers must account for refrigerant piping length and height differences that erode capacity. In retrofit and mixed-use projects, pairing VRF recovery with a plate-based fresh-air exchanger is a common way to capture both inter-zone and outdoor-air savings.
よくある質問
What is the difference between heat-pump and heat-recovery VRF?
Two-pipe heat-pump VRF can only heat or cool at one time, while three-pipe heat-recovery VRF delivers simultaneous heating and cooling by moving heat between zones.
Where is heat-recovery VRF most effective?
It suits mixed-use and perimeter-and-core buildings such as offices, hotels, and clinics where some zones need heat while others need cooling at the same time.
Why pair VRF with a dedicated outdoor-air unit?
VRF recovers heat between zones but brings in no fresh air, so a dedicated outdoor-air unit with a plate exchanger delivers code-compliant ventilation without reheating the whole supply.
What should be checked when selecting VRF heat recovery?
Size branch circuitry for worst-case simultaneous load, verify refrigerant line lengths against limits, and plan defrost cycles for heat-recovery mode in cold climates.
よくある質問
What is the difference between heat-pump and heat-recovery VRF?
Two-pipe heat-pump VRF can only heat or cool at one time, while three-pipe heat-recovery VRF delivers simultaneous heating and cooling by moving heat between zones.
Where is heat-recovery VRF most effective?
It suits mixed-use and perimeter-and-core buildings such as offices, hotels, and clinics where some zones need heat while others need cooling at the same time.
Why pair VRF with a dedicated outdoor-air unit?
VRF recovers heat between zones but brings in no fresh air, so a dedicated outdoor-air unit with a plate exchanger delivers code-compliant ventilation without reheating the whole supply.
What should be checked when selecting VRF heat recovery?
Size branch circuitry for worst-case simultaneous load, verify refrigerant line lengths against limits, and plan defrost cycles for heat-recovery mode in cold climates.
適切な熱交換器を選定
当社のエンジニアが風量、温度、圧力損失の予算に合わせてコアを設計し、用途に応じて板式・回転式・ヒートパイプ回収を選定します。以下をお読みください： 熱交換器ガイド 、または仕様についてお問い合わせください。
関連製品
HVAC および換気向けの板式・回転式・ヒートパイプ回収。
空気と液体用の大表面積固定コア。
大風量向け高効率エネルギー回収。
清浄用途向けの受動的・完全分離流。