Air is a mixture, not a single number Sizing any heat recovery system starts with the state of the air. Four properties define it: Dry-bulb temperature (DB): the ordinary thermometer reading. Wet-bulb temperature (WB): thermometer with a wet wick; tracks the cooling effect of evaporation. Humidity ratio (W): mass of water vapour per mass of […]
엔탈피 회수 vs 현열 회수
Heat recovery is often described as “sensible” or “enthalpy.” The difference decides comfort, energy savings, and which technology to specify. Sensible Recovery Transfers temperature only. Plate exchangers, heat pipes, and run-around coils are sensible devices. They pre-heat or pre-cool the supply air without adding or removing moisture. Enthalpy Recovery Transfers both temperature and moisture. Enthalpy […]
회전식 열회수 휠: 현열 및 엔탈피 형
A rotary heat recovery wheel is a rotating honeycomb disc that slowly turns between the supply and exhaust air streams. As it rotates, the wheel absorbs heat from the exhaust air and releases it into the incoming fresh air. In enthalpy wheels, moisture is also transferred, making them ideal for humidity control. How It Works […]
Enthalpy Recovery Wheel vs Membrane
Choosing between an enthalpy recovery wheel and a membrane exchanger comes down to contamination risk, maintenance tolerance, and how much latent recovery you need. This comparison distills the trade-offs. Side-by-Side Factor Enthalpy Wheel Membrane Moving parts Yes (motor, seals) No Air cross-contamination Small (seal leakage) None (separate streams) Latent effectiveness 70–85% 60–80% Frost risk (cold […]
Enthalpy vs Sensible Wheel: Moisture Transfer
A rotary energy wheel is one of the most effective air-to-air recovery devices available, routinely reaching 70 to 85 percent total effectiveness, but not every application wants what the wheel is selling. The deciding factor is the matrix coating: a plain aluminium wheel moves only sensible temperature energy, while a desiccant-coated enthalpy wheel also transfers […]