A high-temperature heat pump (HTHP) upgrades low-grade waste heat to useful process temperatures of 80 to 120°C, replacing steam boilers or direct electric heaters in industry. This article covers selection and integration.
How It Differs from a Standard Pump
An HTHP uses refrigerants and compression ratios tuned for high lift. The trade-off is lower COP as delivery temperature rises — plan the duty with the heat pump selection calculation method.
Typical Applications
- Process hot water and CIP loops.
- Low-pressure steam generation.
- Preheating in drying and evaporation, paired with an industrial waste heat recovery case.
Performance Targets
| Delivery temp | Typical COP |
|---|---|
| 60°C | 4.0–5.0 |
| 90°C | 3.0–3.8 |
| 120°C | 2.0–2.8 |
Integration Tips
Keep the waste-heat source above the minimum entering temperature and size the sink for the real process flow. For the wider recovery context, see heat pump waste heat recovery. An HTHP is the bridge that turns “too-cold-to-use” reject heat into saleable process energy.
Siting and Controls
An HTHP earns its keep only when a genuine high-temperature use exists, process hot water, low-pressure steam, or drying preheat, and when a steady low-grade source is available to feed it. Place the evaporator as close as practical to that source to limit pumping losses, and size the sink for the real process flow rather than a peak, since oversizing the high-lift compressor is expensive. Controls should prioritize the recovery duty: run the HTHP whenever the waste-heat source and the process demand coincide, and let a buffer tank bridge short mismatches. Refrigerant choice and discharge-temperature limit matter more here than in a comfort pump, so confirm the working fluid can reach the needed delivery temperature safely. Where the process can accept a lower supply temperature, doing so lifts COP materially, so negotiating the process setpoint downward is often the cheapest performance gain.
Frequently Asked Questions
What temperatures can a high-temperature heat pump deliver?
Typically 80 to 120 degrees C, replacing steam boilers or direct electric heaters in suitable industrial processes.
Why does COP fall as delivery temperature rises?
Higher lift requires higher compression ratios, so more work is needed per unit of heat delivered.
What is the ideal source for an HTHP?
A steady low-grade waste-heat stream such as exhaust, wastewater, or process reject, above the minimum entering temperature.
How can HTHP performance be improved without new hardware?
Lowering the required process supply temperature, where the process allows, raises COP significantly.
Frequently Asked Questions
What temperatures can a high-temperature heat pump deliver?
Typically 80 to 120 degrees C, replacing steam boilers or direct electric heaters in suitable industrial processes.
Why does COP fall as delivery temperature rises?
Higher lift requires higher compression ratios, so more work is needed per unit of heat delivered.
What is the ideal source for an HTHP?
A steady low-grade waste-heat stream such as exhaust, wastewater, or process reject, above the minimum entering temperature.
How can HTHP performance be improved without new hardware?
Lowering the required process supply temperature, where the process allows, raises COP significantly.
Specify the right heat exchanger
Our engineers size the core to your airflow, temperature and pressure-drop budget, and select plate, rotary or heat-pipe recovery by application. Read the heat exchanger guide or contact us for a specification.
Related products
Plate, wheel or pipe recovery for HVAC and ventilation.
Stationary, high-surface-area cores for air and liquid.
High-effectiveness energy recovery for large airflows.
Passive, fully separated streams for clean applications.