Data centers consume enormous amounts of electricity for cooling. Much of that energy leaves the facility as low-grade waste heat. By using air-to-air heat exchangers, facilities can pre-cool incoming ventilation air with exhaust air, reducing the load on mechanical cooling and improving Power Usage Effectiveness (PUE).
Why Data Center Heat Recovery Makes Sense
- Server racks produce a steady, high-temperature exhaust airflow.
- Outside air must often be cooled before entering the white space.
- Plate or heat-pipe exchangers transfer heat with no cross-contamination.
- Recovered heat can pre-heat offices, domestic hot water, or adsorption chillers.
Plate Exchangers vs Rotary Wheels for Data Centers
| Factor | Plate Exchanger | Rotary Wheel |
|---|---|---|
| Cross-contamination risk | Very low | Low with purge sector |
| Moisture transfer | Solo sensible | Enthalpy possible |
| Eficiencia | 70–85 % | 75–85 % |
| Mantenimiento | Low | Moderado |
| Mejor ajuste | Cool/dry climates | Humid climates |
Implementation Considerations
- Match exchanger capacity to IT load and airflow (CFM or m³/h).
- Design for N+1 redundancy if cooling is critical.
- Integrate with the building management system for variable-speed fan control.
- Include filtration upstream of the heat exchanger to protect fins and plates.
Explorar air-to-air heat exchanger products suitable for data center retrofits and new builds.
Heat recovery works best when combined with free-cooling and airflow management. In cold or temperate climates an air-side economizer can satisfy the load directly for many hours, with the exchanger handling the remainder and trimming compressor runtime. Hot-aisle or cold-aisle containment keeps the recovered airstream at a stable temperature so effectiveness stays near the rated point. Monitor the loop through the building management system and report recovery against Power Usage Effectiveness so savings are visible to operations. Filtration upstream of the core remains essential: fine dust in return air will otherwise coat plates or heat pipes and raise pressure drop. Review our air-to-air heat exchanger products for data-center rated cores with service access.
Preguntas frecuentes
Does heat recovery affect cooling redundancy?
No, if the system is designed as a pre-cooling stage. Chillers or CRAC units remain as backup.
Can recovered heat be reused?
Yes. It can pre-heat make-up air, domestic water, or drive absorption cooling, depending on temperature level.
Preguntas frecuentes
Does heat recovery affect cooling redundancy?
No, if the system is designed as a pre-cooling stage. Chillers or CRAC units remain as backup.
Can recovered heat be reused?
Yes. It can pre-heat make-up air, domestic water, or drive absorption cooling, depending on temperature level.
Especifique el intercambiador adecuado
Nuestros ingenieros dimensionan el núcleo según su caudal, temperatura y presupuesto de caída de presión, y seleccionan recuperación por placa, rotativa o caloduc según la aplicación. Lea la guía del intercambiador , o contáctenos para una especificación.
Productos relacionados
Recuperación por placa, rotativa o caloduc para HVAC y ventilación.
Núcleos estacionarios de gran superficie para aire y líquido.
Recuperación de energía de alta eficacia para grandes caudales.
Corrientes pasivas y totalmente separadas para aplicaciones limpias.