Data centers consume enormous amounts of electricity for cooling. Much of that energy leaves the facility as low-grade waste heat. By using air-to-air heat exchangers, facilities can pre-cool incoming ventilation air with exhaust air, reducing the load on mechanical cooling and improving Power Usage Effectiveness (PUE).
Why Data Center Heat Recovery Makes Sense
- Server racks produce a steady, high-temperature exhaust airflow.
- Outside air must often be cooled before entering the white space.
- Plate or heat-pipe exchangers transfer heat with no cross-contamination.
- Recovered heat can pre-heat offices, domestic hot water, or adsorption chillers.
Plate Exchangers vs Rotary Wheels for Data Centers
| Facteur | Plate Exchanger | Rotary Wheel |
|---|---|---|
| Cross-contamination risk | Very low | Low with purge sector |
| Moisture transfer | Sensible uniquement | Enthalpy possible |
| Efficacité | 70–85 % | 75–85 % |
| Maintenance | Low | Modéré |
| Meilleur ajustement | Cool/dry climates | Humid climates |
Implementation Considerations
- Match exchanger capacity to IT load and airflow (CFM or m³/h).
- Design for N+1 redundancy if cooling is critical.
- Integrate with the building management system for variable-speed fan control.
- Include filtration upstream of the heat exchanger to protect fins and plates.
Parcourir air-to-air heat exchanger products suitable for data center retrofits and new builds.
Heat recovery works best when combined with free-cooling and airflow management. In cold or temperate climates an air-side economizer can satisfy the load directly for many hours, with the exchanger handling the remainder and trimming compressor runtime. Hot-aisle or cold-aisle containment keeps the recovered airstream at a stable temperature so effectiveness stays near the rated point. Monitor the loop through the building management system and report recovery against Power Usage Effectiveness so savings are visible to operations. Filtration upstream of the core remains essential: fine dust in return air will otherwise coat plates or heat pipes and raise pressure drop. Review our air-to-air heat exchanger products for data-center rated cores with service access.
Questions fréquemment posées
Does heat recovery affect cooling redundancy?
No, if the system is designed as a pre-cooling stage. Chillers or CRAC units remain as backup.
Can recovered heat be reused?
Yes. It can pre-heat make-up air, domestic water, or drive absorption cooling, depending on temperature level.
Questions fréquemment posées
Does heat recovery affect cooling redundancy?
No, if the system is designed as a pre-cooling stage. Chillers or CRAC units remain as backup.
Can recovered heat be reused?
Yes. It can pre-heat make-up air, domestic water, or drive absorption cooling, depending on temperature level.
Spécifiez le bon échangeur
Nos ingénieurs dimensionnent le noyau selon votre débit, température et budget de perte de charge, et choisissent la récupération par plaque, rotative ou caloduc selon l'application. Lisez le guide de l'échangeur , ou contactez-nous pour une spécification.
Produits connexes
Récupération par plaque, rotative ou caloduc pour le CVC et la ventilation.
Noyaux stationnaires à grande surface pour l'air et le liquide.
Récupération d'énergie à haute efficacité pour grands débits.
Courants passifs et totalement séparés pour applications propres.