Intercambiadores de placas brasadas frente a placas con junta

Construction Brazed plate exchangers fuse stainless plates with copper or nickel under vacuum, with no gaskets and no frame bolts. Gasketed plate exchangers clamp plates between a fixed and moving frame using elastomer gaskets, allowing plates to be added or removed. Comparison Factor Brazed Gasketed Max temperature or pressure Higher Moderate Maintenance Sealed, service-free Plates […]

Rueda desecante vs rueda de recuperación : cuándo usar cuál

Energy recovery wheel Transfers both sensible and (if enthalpic) latent heat between supply and exhaust air. Goal: cut HVAC heating/cooling load. Made of aluminum or polymer matrix, sometimes with a moisture-absorbing coating. Desiccant wheel Impregnated or coated with a desiccant (silica gel, molecular sieve, or zeolite). Its job is dehumidification – it pulls moisture from […]

Intercambiadores para entornos marinos y corrosivos

Ships, offshore platforms, and chemical plants expose heat exchangers to salt spray, high humidity, and aggressive gases. In these corrosive environments, material selection is as important as thermal design. Material Options Hydrophilic aluminum: Good for clean marine ventilation, low cost. Stainless steel (304/316L): Resists salt and many chemicals; heavier and pricier. Epoxy / phenolic coated […]

Recuperación de entalpía vs sensible

Heat recovery is often described as “sensible” or “enthalpy.” The difference decides comfort, energy savings, and which technology to specify. Sensible Recovery Transfers temperature only. Plate exchangers, heat pipes, and run-around coils are sensible devices. They pre-heat or pre-cool the supply air without adding or removing moisture. Enthalpy Recovery Transfers both temperature and moisture. Enthalpy […]

Empieza a escribir tu término de búsqueda arriba y pulsa Intro para buscar. Pulsa Esc para cancelar.

Volver arriba
Calculadoras gratuitas de recuperación de calor y herramientas de dimensionamiento