This district energy case study summarizes a representative low-carbon heating and cooling network that supplies a mixed urban district from recovered industrial waste heat plus combined heat and power (CHP).
System Layout
- A district energy station consolidates heat from a nearby factory’s exhaust and a natural-gas CHP module.
- A seasonal storage buffer shifts summer cooling reject heat to winter heating.
- Building substations use plate exchangers to isolate the network from occupant loops.
Measured Outcomes
| Indicator | Result |
|---|---|
| Share of heat from recovery plus CHP | about 78% |
| Network return temperature | Reduced 12°C vs baseline |
| CO2 vs separate boilers | minus 61% |
Lessons Learned
Low return temperatures were the single biggest lever — they raised the usable recovery fraction from the industrial waste heat recovery case nearby. The CHP unit followed the heat demand, exporting power only when the grid price justified it.
For a smaller, single-building view of the same principles, see CHP case study. District schemes scale those ideas across many consumers sharing one recovery backbone.
Why Low Return Temperature Wins
The single design choice that made the network work was holding building return temperatures low. Lower return temperatures raise the temperature lift the recovery plant can exploit and let lower-grade waste heat enter the loop, which directly increased the share of demand met without combustion. Substations with plate exchangers isolated each building’s water from the network, so a single fault could not propagate, and the seasonal storage let summer cooling reject become winter heating instead of being dumped. For operators, the lesson is to meter each connection and tune the primary pump to the recovered-heat availability rather than a fixed schedule. District schemes like this scale the ideas of a single-building recovery backbone across many consumers, and the economics improve as more diverse loads, some heating and some cooling, share one thermal bus and flatten each other’s peaks.
よくある質問
What made the district energy network efficient?
Holding low network return temperatures, which raised the usable fraction of recovered industrial waste heat and combined-heat-and-power output.
How does seasonal storage help a district scheme?
It shifts surplus summer cooling reject heat to winter heating, turning a seasonal mismatch into stored supply.
Why use plate exchangers at building substations?
They isolate each building's occupant loop from the network so a fault or maintenance on one connection does not propagate to others.
How does district energy relate to single-building recovery?
It applies the same recovery principles across many consumers sharing one thermal backbone, smoothing peaks and improving economics.
よくある質問
What made the district energy network efficient?
Holding low network return temperatures, which raised the usable fraction of recovered industrial waste heat and combined-heat-and-power output.
How does seasonal storage help a district scheme?
It shifts surplus summer cooling reject heat to winter heating, turning a seasonal mismatch into stored supply.
Why use plate exchangers at building substations?
They isolate each building's occupant loop from the network so a fault or maintenance on one connection does not propagate to others.
How does district energy relate to single-building recovery?
It applies the same recovery principles across many consumers sharing one thermal backbone, smoothing peaks and improving economics.
適切な熱交換器を選定
当社のエンジニアが風量、温度、圧力損失の予算に合わせてコアを設計し、用途に応じて板式・回転式・ヒートパイプ回収を選定します。以下をお読みください： 熱交換器ガイド 、または仕様についてお問い合わせください。
関連製品
HVAC および換気向けの板式・回転式・ヒートパイプ回収。
空気と液体用の大表面積固定コア。
大風量向け高効率エネルギー回収。
清浄用途向けの受動的・完全分離流。