Walk any Chinese HVAC factory floor in 2026 and you will see two air-to-air recovery technologies dominating the line: the fixed-plate recuperator および rotary enthalpy wheel. They solve the same problem — recovering energy from exhaust air — with opposite mechanics. Knowing which one a supplier pushes tells you a lot about their target application.
Plate recuperators (fixed plate)
Counterflow and crossflow aluminium or polymer-coated plates, sized from ~200 m³/h (residential ERV) up to 5,000+ m³/h per module. No moving parts, no carryover between streams — which is why Chinese makers sell them hard into hospitals, schools, labs and cleanrooms. Counterflow plates reach 80–90% sensible effectiveness; enthalpy (ERV) plates add latent recovery at 70–80%. See our plate exchanger overview.
Rotary wheels (enthalpy / sensible)
Coated-aluminium and molecular-sieve wheels span 500 to 100,000+ m³/h for large AHUs in malls, airports, plants and district systems. A purge sector and better seals have pushed carryover down, and desiccant coatings handle latent load. Typical effectiveness 75–85%.
Heat-pipe and run-around (niche)
For server rooms, fume hoods and corrosive exhaust, passive heat-pipe or run-around coils recover energy without mixing streams — a small but steady export line.
How Chinese makers position them
Plates win on hygiene and mid/low volume; wheels win on large volume and latent recovery. The cost gap is narrowing as wheel lines automate, but plates still edge out on lifetime service simplicity (no motor, no seal kit).
Selection logic for buyers
- Choose plate when streams must not mix, or duty is small-to-mid and分散.
- Choose a wheel for large central AHUs needing both sensible and latent recovery.
- Always ask for tested effectiveness at your design face velocity, not catalogue peak.
よくある質問
Q: Which is better, plate or rotary wheel?
A: Neither is universally better. Plates avoid cross-contamination and suit hygiene-sensitive or smaller duties; wheels suit large AHUs needing sensible + latent recovery. Pick by application, then verify tested effectiveness at your face velocity.
Q: Do Chinese factories make both?
A: Yes. Most full-line suppliers offer both plate and wheel recovery, plus heat-pipe options, so you can specify one vendor across a project.
Not sure which fits your AHU? Talk to our engineers (kuns913@gmail.com / WhatsApp +86 1575335505) — we manufacture both in Shandong.
よくある質問
Which is better, plate or rotary wheel?
Neither is universally better. Plates avoid cross-contamination and suit hygiene-sensitive or smaller duties; wheels suit large AHUs needing sensible + latent recovery. Pick by application, then verify tested effectiveness at your face velocity.
Do Chinese factories make both?
Yes. Most full-line suppliers offer both plate and wheel recovery, plus heat-pipe options, so you can specify one vendor across a project.
適切な熱交換器を選定
当社のエンジニアが風量、温度、圧力損失の予算に合わせてコアを設計し、用途に応じて板式・回転式・ヒートパイプ回収を選定します。以下をお読みください： 熱交換器ガイド 、または仕様についてお問い合わせください。
関連製品
HVAC および換気向けの板式・回転式・ヒートパイプ回収。
空気と液体用の大表面積固定コア。
大風量向け高効率エネルギー回収。
清浄用途向けの受動的・完全分離流。