Rectangular Cores for EV Charging Station Ventilation

Tこの製品は高効率の 長方形顕熱交換コア EV充電ステーション、電気キャビネット、エネルギー貯蔵エンクロージャの換気と冷却のために特別に設計されています。特徴は 向流式空気-空気熱交換構造、内部と外部の気流間で効果的な熱伝達を可能にしながら、それらを完全に分離し、粉塵、湿気、汚染物質がキャビネットに入るのを防ぎます。

熱交換器コアは、次のような高熱伝導率材料を用いて製造されています: アルミホイルまたはステンレス鋼、優れた熱伝達性能、耐食性、構造的耐久性を確保します。交差流式設計と比較して、 向流式構成はより高い熱交換効率を提供します、低風量条件下でのより優れた冷却性能を可能にし、ファンのエネルギー消費を削減します。

を備えた 矩形モジュール設計、本ユニットは、EV充電器、配電キャビネット、バッテリー蓄電システム、通信キャビネットなど、さまざまな機器エンクロージャへの統合が容易です。風量容量、寸法、チャネル間隔、耐熱性について完全なカスタマイズに対応し、さまざまなアプリケーション要件を満たします。

実際のアプリケーションにおいて、この顕熱交換コアはキャビネット内部温度を効果的に低下させ、従来の空調システムを部分的に置き換え、全体的なエネルギー消費を大幅に削減します。また、システムの信頼性を向上させ、電気部品の使用寿命を延ばし、省エネ熱管理の理想的なソリューションとなります。

Fast EV chargers, power-distribution cabinets, and battery-energy-storage enclosures concentrate a lot of power electronics in a small, often outdoor, space. IGBTs, rectifiers, and battery racks all generate heat, and once internal temperature rises the equipment derates or shuts down to protect itself. Moving that heat out with outside air is the simplest cooling path, but the cabinet must stay sealed against dust, rain, salt, and insects. A counterflow air-to-air core solves this by passing the hot internal air and the cool external air through adjacent, separately sealed channels so heat crosses the plate wall while the airstreams never mix.

Counterflow geometry keeps the two streams flowing in opposite directions, which sustains a larger average temperature difference than a crossflow layout and therefore delivers more cooling for the same core size. The rectangular, modular core drops into the cabinet wall, and the sealed plates keep IP-rated separation between inside and outside. Specifiers can tune channel spacing to balance heat transfer against pressure drop, choose aluminium foil for light weight or stainless for harsh sites, and size the core to the cabinet heat rejection so the fan energy stays low. In moderate climates the core can carry much of the cooling load and reduce reliance on active air conditioning.

よくある質問

Why choose a counterflow core over a crossflow one for cabinet cooling?
Counterflow keeps the two airstreams moving in opposite directions, preserving a larger average temperature difference along the whole plate. For the same footprint this extracts more heat than a crossflow core, which matters when cabinet space is tight.

How are the internal and external air kept separate?
The core is built from sealed plate channels. Hot internal air and cool outside air travel in adjacent passages that never open into each other, so dust, moisture, and salt stay out of the electronics while heat still transfers across the wall.

Can this replace the air conditioner in an EV charger?
In moderate climates the core can handle much of the cooling load and reduce air-conditioning runtime. In hot environments it is usually applied as pre-cooling to lower the load on the active cooling system rather than replace it entirely.

What can be customized?
Dimensions, airflow capacity, channel spacing, and temperature resistance can all be tailored to the enclosure, whether that is an EV charger, a power cabinet, a battery-storage system, or a telecom cabinet.

よくある質問

Why choose a counterflow core over a crossflow one for cabinet cooling?

Counterflow keeps the two airstreams moving in opposite directions, preserving a larger average temperature difference along the whole plate. For the same footprint this extracts more heat than a crossflow core, which matters when cabinet space is tight.

How are the internal and external air kept separate?

The core is built from sealed plate channels. Hot internal air and cool outside air travel in adjacent passages that never open into each other, so dust, moisture, and salt stay out of the electronics while heat still transfers across the wall.

Can this replace the air conditioner in an EV charger?

In moderate climates the core can handle much of the cooling load and reduce air-conditioning runtime. In hot environments it is usually applied as pre-cooling to lower the load on the active cooling system rather than replace it entirely.

What can be customized?

Dimensions, airflow capacity, channel spacing, and temperature resistance can all be tailored to the enclosure, whether that is an EV charger, a power cabinet, a battery-storage system, or a telecom cabinet.

適切な熱交換器を選定

当社のエンジニアが風量、温度、圧力損失の予算に合わせてコアを設計し、用途に応じて板式・回転式・ヒートパイプ回収を選定します。以下をお読みください: 熱交換器ガイド 、または仕様についてお問い合わせください。

見積りを依頼

関連製品

Air-to-Air Heat Exchanger

HVAC および換気向けの板式・回転式・ヒートパイプ回収。

Plate Heat Exchanger

空気と液体用の大表面積固定コア。

ロータリー熱回収ホイール

大風量向け高効率エネルギー回収。

Heat Pipe Heat Exchanger

清浄用途向けの受動的・完全分離流。

関連投稿

検索語を上に入力し、 Enter キーを押して検索します。キャンセルするには ESC を押してください。

トップに戻る
無料の熱回収計算ツールおよびサイジングツール