Industrial drying accounts for a large share of energy consumption in food processing, wood, textiles, ceramics, and agriculture. Most of that energy leaves the dryer as hot, humid exhaust air. A well-designed heat recovery system can recapture much of that energy and pre-heat the incoming drying air. Why Drying Exhaust Is Ideal for Heat Recovery […]
プレート vs ロータリー vs ヒートパイプ：熱交換器の選び方
Choosing the right air-to-air heat exchanger depends on airflow, temperature, humidity, installation space, and contamination risk. This guide compares the three most common technologies. Quick Comparison Feature Plate Exchanger Rotary Wheel Heat Pipe Efficiency High (70–85 %) High (75–85 %) Moderate (50–70 %) Moving parts None Motor/bearings None Cross-contamination Very low Low with purge Zero […]
ヒートパイプ熱交換器：受動的热輸送
A heat pipe heat exchanger uses sealed tubes filled with a working fluid to move heat from one air stream to another. It has no moving parts, requires no external power, and keeps the two streams physically separated. Working Principle Each heat pipe is a sealed tube with an internal wick structure. At the hot […]
回転式熱回収ホイール：顕熱とエンタルピー型
A rotary heat recovery wheel is a rotating honeycomb disc that slowly turns between the supply and exhaust air streams. As it rotates, the wheel absorbs heat from the exhaust air and releases it into the incoming fresh air. In enthalpy wheels, moisture is also transferred, making them ideal for humidity control. How It Works […]
プレート熱交換器：動作原理、種類、用途
A plate heat exchanger is one of the most efficient ways to recover thermal energy from exhaust air, process gas, or ventilation streams. It consists of multiple thin metal plates separated by gaskets or formed air gaps, creating alternating channels for the hot and cold streams. Heat moves through the plate material without the two […]
WELL Building Standard Ventilation
The WELL Building Standard v2 (IWBI) is a performance standard for occupant health, and ventilation is one of its strongest levers. Where energy codes set a floor for “acceptable” air, WELL rewards going well beyond it. This article covers the Air Concept features most relevant to recovery and ventilation design. Feature A06 — Enhanced Ventilation […]
IECC Energy Recovery Provisions
The International Energy Conservation Code (IECC) is updated on a three-year cycle (2018, 2021, 2024) and is adopted — with or without amendments — by most U.S. states. Its commercial energy-recovery rule lives in Section C403.7, and it is the baseline that many state codes reference. This article summarizes the C403.7 trigger and how the […]
Building Decarbonization Heat Recovery
Building decarbonization means cutting the fossil-carbon intensity of how a building is heated, cooled, and powered. Heat recovery is the cheapest decarbonization step there is — it shrinks the load before you ever pay for clean supply. This article frames recovery inside the electrify-and-recover strategy. Recovery First, Then Electrify The decarbonization sequence that costs the […]
建築基準法の熱回収義務
Across jurisdictions, building codes increasingly mandate energy recovery once a system serves enough outdoor air. This overview compares the main regimes so a designer can specify one core that clears them all. Minimum Effectiveness by Regime Regime Trigger Minimum recovery ASHRAE 90.1-2022 (US) ≥ 5,000 CFM and ≥ 70% OA 50% enthalpy (AHRI 1060) IECC […]
Passive House Heat Recovery
The Passive House (Passivhaus) standard — from the Passive House Institute (PHI) in Darmstadt — is the most demanding envelope-and-services benchmark in buildings, and continuous ventilation with heat recovery is mandatory. This article covers the recovery requirements and how they compare with code minimums. Core Recovery Requirement Metric PHI limit Sensible heat recovery efficiency (HRV/ERV) […]