Circular Principles for Heat Recovery A circular-economy view treats a heat recovery ventilator as a material bank, not waste. The hierarchy is reuse, then refurbish, then recover, keep exchangers, fans, and controls in service, then recover metals and refrigerants at end of life. Design and Policy Levers Design for disassembly: modular cores, standard fasteners, documented […]
エンタルピー回収ホイール対膜
Choosing between an enthalpy recovery wheel and a membrane exchanger comes down to contamination risk, maintenance tolerance, and how much latent recovery you need. This comparison distills the trade-offs. Side-by-Side Factor Enthalpy Wheel Membrane Moving parts Yes (motor, seals) No Air cross-contamination Small (seal leakage) None (separate streams) Latent effectiveness 70–85% 60–80% Frost risk (cold […]
熱回収有効度試験規格
“Effectiveness” is the number every code and rating system quotes, but the value only means something if the test method is stated. This article maps the main heat recovery effectiveness test standards and how they define the metric. Definitions Sensible effectiveness ηs = (Tsupply − Toutdoor) / (Textract − Toutdoor). Enthalpy (total) effectiveness ηt = […]
高温ヒートポンプ熱回収
A high-temperature heat pump (HTHP) upgrades low-grade waste heat to useful process temperatures of 80 to 120°C, replacing steam boilers or direct electric heaters in industry. This article covers selection and integration. How It Differs from a Standard Pump An HTHP uses refrigerants and compression ratios tuned for high lift. The trade-off is lower COP […]
LEED エネルギー回収クレジット
Energy recovery contributes to the Energy & Atmosphere (EA) credits that dominate LEED scoring. Whether you register under LEED v4.1 (still open in 2026) or the newer LEED v5 (2025–2030 cycle), ventilation recovery reduces the modeled energy use that the credit is scored on. LEED v4.1 BD+C EA Credit: Optimize Energy Performance is worth up […]
膜式空調システム
Membrane air conditioning systems separate the sensible and latent cooling loads using a liquid-desiccant loop and a membrane contactor, rather than a single overcooling coil. The result is drier supply air at a higher coil evaporating temperature — which raises the chiller COP. Core Components A typical unit pairs a membrane energy recovery ventilation core […]
ISO 50001 と熱回収
ISO 50001:2018, confirmed in 2024 and updated by Amendment 1:2024 (climate-action wording), is the international standard for an Energy Management System (EnMS). It does not prescribe technologies, but its structure makes heat recovery a natural “significant energy use” to control and measure. The EnMS Cycle ISO 50001 follows Plan-Do-Check-Act: Energy review — map energy sources, […]
コールドチェーン熱回収事例研究
This cold chain heat recovery case study looks at a refrigerated distribution center that captures condenser reject heat to warm the dispatch area and preheat sanitation water, instead of dumping it outdoors. The Opportunity Every kW of cooling at the evaporator becomes roughly 1.2 to 1.4 kW of heat at the condenser. In cold chain […]
EU の EPBD とゼロエミッション建築
The revised Energy Performance of Buildings Directive (EU) 2024/1275 — the EPBD — entered into force on 28 May 2024, with Member States required to transpose it into national law by 29 May 2026. It raises the bar from nearly-zero-energy to zero-emission buildings and makes heat recovery central to compliance. Key Dates Milestone Date Directive […]
地域エネルギー事例研究
This district energy case study summarizes a representative low-carbon heating and cooling network that supplies a mixed urban district from recovered industrial waste heat plus combined heat and power (CHP). System Layout A district energy station consolidates heat from a nearby factory’s exhaust and a natural-gas CHP module. A seasonal storage buffer shifts summer cooling […]