Walk any Chinese HVAC factory floor in 2026 and you will see two air-to-air recovery technologies dominating the line: the fixed-plate recuperator 및 rotary enthalpy wheel. They solve the same problem — recovering energy from exhaust air — with opposite mechanics. Knowing which one a supplier pushes tells you a lot about their target application.
Plate recuperators (fixed plate)
Counterflow and crossflow aluminium or polymer-coated plates, sized from ~200 m³/h (residential ERV) up to 5,000+ m³/h per module. No moving parts, no carryover between streams — which is why Chinese makers sell them hard into hospitals, schools, labs and cleanrooms. Counterflow plates reach 80–90% sensible effectiveness; enthalpy (ERV) plates add latent recovery at 70–80%. See our plate exchanger overview.
Rotary wheels (enthalpy / sensible)
Coated-aluminium and molecular-sieve wheels span 500 to 100,000+ m³/h for large AHUs in malls, airports, plants and district systems. A purge sector and better seals have pushed carryover down, and desiccant coatings handle latent load. Typical effectiveness 75–85%.
Heat-pipe and run-around (niche)
For server rooms, fume hoods and corrosive exhaust, passive heat-pipe or run-around coils recover energy without mixing streams — a small but steady export line.
How Chinese makers position them
Plates win on hygiene and mid/low volume; wheels win on large volume and latent recovery. The cost gap is narrowing as wheel lines automate, but plates still edge out on lifetime service simplicity (no motor, no seal kit).
Selection logic for buyers
- Choose plate when streams must not mix, or duty is small-to-mid and分散.
- Choose a wheel for large central AHUs needing both sensible and latent recovery.
- Always ask for tested effectiveness at your design face velocity, not catalogue peak.
자주 묻는 질문
Q: Which is better, plate or rotary wheel?
A: Neither is universally better. Plates avoid cross-contamination and suit hygiene-sensitive or smaller duties; wheels suit large AHUs needing sensible + latent recovery. Pick by application, then verify tested effectiveness at your face velocity.
Q: Do Chinese factories make both?
A: Yes. Most full-line suppliers offer both plate and wheel recovery, plus heat-pipe options, so you can specify one vendor across a project.
Not sure which fits your AHU? Talk to our engineers (kuns913@gmail.com / WhatsApp +86 1575335505) — we manufacture both in Shandong.
자주 묻는 질문
Which is better, plate or rotary wheel?
Neither is universally better. Plates avoid cross-contamination and suit hygiene-sensitive or smaller duties; wheels suit large AHUs needing sensible + latent recovery. Pick by application, then verify tested effectiveness at your face velocity.
Do Chinese factories make both?
Yes. Most full-line suppliers offer both plate and wheel recovery, plus heat-pipe options, so you can specify one vendor across a project.
적합한 열교환기 선정
당사 엔지니어가 풍량, 온도, 압력 손실 예산에 맞춰 코어를 설계하고, 적용에 따라 판형·회전식·히트파이프 회수를 선택합니다. 다음을 읽으세요: 열교환기 가이드 , 또는 사양 관련 문의를 주세요.
관련 제품
HVAC 및 환기용 판형·회전식·히트파이프 회수.
공기 및 액체용 대면적 고정 코어.
대풍량용 고효율 에너지 회수.
청정 적용을 위한 수동적·완전 분리 유동.