H热回收大致分为两种形式。 空气-空气 换热器在两个气流之间直接传递热量。 Air-to-water 装置(如绕管盘管或排气水加热器)将热量传入流体回路,可为远距离或混合负荷供能。
Side-by-Side
| 因素 | Air-to-Air | Air-to-Water |
|---|---|---|
| 流体 | 两条空气风管 | 空气+水/乙二醇回路 |
| 距离 | 短(芯体同址) | 长(管道输送热量) |
| 交叉污染 | 无(板/管) | 无(闭环) |
| 再利用选项 | 预热送风 | 空气、水加热、工艺 |
| 复杂度 | 低 | 较高(泵、膨胀罐) |
| 成本 | 较低 | 较高 |
When Air-to-Water Wins
- 排风与热汇位于不同楼层或建筑时。
- 您希望加热生活用水或某个工艺过程,而不仅仅是空气。
- 多个排风点汇入同一回路。
When Air-to-Air Wins
- 送风与排风并排布置时。
- 您只需预处理的新风(补风)。
- 预算与简洁为优先考虑时。
Hybrid arrangements are common in practice. A building may use air-to-air recovery for the bulk of the ventilation load and an air-to-water loop to serve a distant domestic-water or process load that the air stream cannot reach. Controls should coordinate the two so the water loop does not fight the air core; a simple priority rule keyed to outside-air temperature works well. In a laboratory or mixed-use building, for example, the air-to-air core trims ventilation load while the loop pre-heats service water, and the combined effect shortens payback versus either alone. Keep the loop insulated and the pump sized to design flow to protect efficiency. Our 热回收解决方案 cover both air-to-air and air-to-water forms.
常见问题
能否将两者结合?
可以。空气-空气处理主要回收;空气-水回路服务于远距离或水负荷。
哪种效率更高?
空气-空气通常高出几个百分点,因为没有水泵且传热步骤更少。
常见问题
能否将两者结合?
可以。空气-空气处理主要回收;空气-水回路服务于远距离或水负荷。
哪种效率更高?
空气-空气通常高出几个百分点,因为没有水泵且传热步骤更少。
相关产品
面向暖通空调与通风的板式、旋转式或热管回收。
空气与液体用大表面积固定芯体。
大风量用高效能量回收。
用于洁净场合的被动、完全分离气流。