California Title 24 Heat Recovery

California Title 24, Part 6 (the Building Energy Efficiency Standards) is the most aggressive state energy code in the U.S., and its 2022 edition — effective 1 January 2023, with a July 2024 Supplement — puts heat recovery at the center of both nonresidential and multifamily compliance. This article distills the recovery provisions that trigger HRV/ERV specification in California.

Nonresidential Exhaust Air Heat Recovery

The 2022 code adds prescriptive requirements for exhaust air heat recovery based on climate zone, percent of outdoor air, and annual operating hours (Tables 140.4-J and 140.4-K). It also adds a dedicated DOAS prescriptive path (§140.4(p)). A key interaction: a cooling system combined with a DOAS that includes exhaust-air heat recovery is exempt from the economizer requirement below 54,000 BTU/h, whereas a standalone unit needs an economizer above 33,000 BTU/h.

元素 Title 24 2022 provision
DOAS exhaust-air heat recovery Prescriptive design path added (§140.4(p))
Economizer relief DOAS + recovery allowed < 54,000 BTU/h without economizer
Exhaust recovery tables 140.4-J (by climate zone / % OA), 140.4-K (by operating hours)
Filtration MERV 13 minimum on mechanical ventilation supply (§120.1(c)1)

Multifamily HRV/ERV Mandate

For balanced-ventilation multifamily dwelling units in Climate Zones 1–2 and 11–16, the code prescribes a heat or energy recovery ventilator with a minimum sensible heat recovery effectiveness of 67% at design conditions. Fan efficacy limits are strict:

  • Unitary ERV/HRV: fan efficacy ≤ 0.6 W/cfm (a mandatory 1.0 W/cfm floor applies in all climate zones).
  • Central ERV/HRV (multi-unit): ≤ 1.2 W/cfm, and a bypass function is required so intake air can bypass the core like an economizer.

Decarbonization Direction

The 2022 code strengthens the push from gas to heat pumps (§140.4(a)2) and targets net-zero-energy commercial buildings by 2030. Recovery is the demand-reduction step that makes an all-electric, heat-pump strategy affordable. For the cross-jurisdiction picture, see the building code heat recovery mandate comparison, and for the federal floor see ASHRAE 90.1-2022 (50% minimum). California’s 67% sensible floor for multifamily is notably higher than the federal 50% enthalpy floor.

Sizing Note

Specify the core and verify pressure drop inside the AHU 选型计算. Pair a non-rotating 膜芯体 where cross-contamination control matters; otherwise a wheel clears the 67% threshold comfortably — but watch frost, per 能量回收轮故障排查.

常见问题

What does Title 24 2022 require for nonresidential exhaust recovery?
Prescriptive exhaust-air heat recovery based on climate zone, percent outdoor air, and operating hours, plus a dedicated DOAS prescriptive path.

What is the multifamily HRV or ERV mandate?
In climate zones 1 to 2 and 11 to 16, a minimum 67% sensible effectiveness at design conditions, with strict fan-efficacy limits and a required bypass function.

How does recovery interact with the economizer rule?
A DOAS with exhaust-air heat recovery is exempt from the economizer below 54,000 BTU/h, whereas a standalone unit needs one above 33,000 BTU/h.

How does Title 24 compare to federal 90.1?
California's 67% multifamily sensible floor is higher than the federal 50% enthalpy floor, and it pushes decarbonization via heat pumps.

常见问题

What does Title 24 2022 require for nonresidential exhaust recovery?

Prescriptive exhaust-air heat recovery based on climate zone, percent outdoor air, and operating hours, plus a dedicated DOAS prescriptive path.

What is the multifamily HRV or ERV mandate?

In climate zones 1 to 2 and 11 to 16, a minimum 67% sensible effectiveness at design conditions, with strict fan-efficacy limits and a required bypass function.

How does recovery interact with the economizer rule?

A DOAS with exhaust-air heat recovery is exempt from the economizer below 54,000 BTU/h, whereas a standalone unit needs one above 33,000 BTU/h.

How does Title 24 compare to federal 90.1?

California's 67% multifamily sensible floor is higher than the federal 50% enthalpy floor, and it pushes decarbonization via heat pumps.

选型合适的换热器

我们的工程师会根据您的风量、温度和压降预算设计芯体,并按应用选择板式、旋转式或热管回收。阅读 换热器指南 ,或联系我们获取规格书。

询价

相关产品

Air-to-Air Heat Exchanger

面向暖通空调与通风的板式、旋转式或热管回收。

Plate Heat Exchanger

空气与液体用大表面积固定芯体。

旋转热回收轮

大风量用高效能量回收。

Heat Pipe Heat Exchanger

用于洁净场合的被动、完全分离气流。

相关文章

开始在上面输入您的搜索词,然后按回车进行搜索。按ESC取消。

返回顶部
免费热回收计算器及选型工具