Marine Drying & Waste Heat Recovery Units

T本设备专为鱼、虾、贝类、海藻等水产副产物的高效干燥与加工而设计。其集成的热回收系统最大化能源效率，同时降低运营成本。整机采用耐盐不锈钢制造，在恶劣的海洋和高盐环境中确保长期耐用性。适用于可持续水产加工、废物最小化和节能运营。

主要特点：

 

• 适用于鱼、虾、贝类、海藻残渣的干燥与加工

• 内置热回收系统，实现节能运行

• 高品质不锈钢结构，耐盐腐蚀

• 减少废弃物量，提升环境可持续性

• 耐用且低维护的设计，适应恶劣海洋环境

Marine and coastal processing sites face two pressures at once: high energy cost for thermal drying and a corrosive environment that destroys ordinary equipment. This heat-recovery drying unit answers both. A built-in air-to-air plate recuperator captures heat from the humid exhaust leaving the drying chamber and uses it to preheat the incoming fresh air, so the burner or electric heater only supplies the remaining temperature lift. In continuous seafood processing this recirculation of energy can remove a large share of the heating load.

Construction is the other half of the story. Every wetted and exposed surface is built from salt-resistant stainless steel, typically 304 for mildly corrosive duty and 316L where seawater spray or high salt loads are expected. The smooth stainless surfaces are easy to wash down, helping sites meet HACCP and food-safety hygiene expectations for fish, shrimp, shellfish, and seaweed processing. Because the unit reduces the volume of processing residue and recovers energy at the same time, operators see lower utility bills and less solid waste to dispose of. For vessels and shore plants alike, the low-maintenance, corrosion-proof design means the equipment keeps running through long seasons with minimal downtime.

常见问题

What makes this unit resistant to salt corrosion?
All wetted and exterior surfaces are built from salt-resistant stainless steel, with 316L specified where seawater spray or high salinity is expected. Stainless avoids the rapid pitting and rust that would shorten the life of ordinary carbon-steel equipment in marine duty.

How does the integrated heat-recovery system save energy?
A built-in air-to-air plate recuperator transfers heat from the humid exhaust to the incoming fresh drying air. The heating system then supplies only the remaining temperature lift, cutting the fuel or electricity needed for drying.

Can the equipment handle different seafood by-products?
Yes. The unit is configured for fish, shrimp, shellfish, and seaweed residues, and the modular layout adapts to different throughput and moisture loads common in seafood processing.

Does it support food-safety requirements?
The stainless contact surfaces are easy to clean and wash down, which supports HACCP and general hygiene programs in food processing. Closed, recoverable airflow also helps control odors and emissions.

常见问题

What makes this unit resistant to salt corrosion?

All wetted and exterior surfaces are built from salt-resistant stainless steel, with 316L specified where seawater spray or high salinity is expected. Stainless avoids the rapid pitting and rust that would shorten the life of ordinary carbon-steel equipment in marine duty.

How does the integrated heat-recovery system save energy?

A built-in air-to-air plate recuperator transfers heat from the humid exhaust to the incoming fresh drying air. The heating system then supplies only the remaining temperature lift, cutting the fuel or electricity needed for drying.

Can the equipment handle different seafood by-products?

Yes. The unit is configured for fish, shrimp, shellfish, and seaweed residues, and the modular layout adapts to different throughput and moisture loads common in seafood processing.

Does it support food-safety requirements?

The stainless contact surfaces are easy to clean and wash down, which supports HACCP and general hygiene programs in food processing. Closed, recoverable airflow also helps control odors and emissions.