The everyday opportunity
Offices, hotels, and mixed-use buildings run ventilation around the clock with high fresh-air rates. Recovering that exhaust energy is the single biggest HVAC saving for most commercial stock.
Technology mix
- Offices – balanced AHUs favor plate or rotary recovery; see AHU recovery.
- Hotels – guest-room ventilation plus laundry and pool loads; pair with retail and leisure recovery ideas.
- Mixed-use – a central plant with district-style sharing wins.
Climate matters
Use climate-based selection: enthalpic cores in humid zones, sensible plate in dry ones. Keep wheel upkeep in mind if you choose rotary.
Payback
Most commercial retrofits pay back in 3-5 years. Size with our payback method and verify with efficiency metrics.
Where the savings come from
- Make-up air pre-conditioning – the largest load in continuously ventilated buildings.
- Reduced boiler and chiller runtime, especially during shoulder seasons.
- Smaller HVAC plant if recovery is specified early in design.
Specification tips
Favor sensible plate cores in dry climates and enthalpy wheels where humidity control dominates. Size the core from measured airflow, not nameplate, and keep a maintenance window for filter and wheel service.
Frequently Asked Questions
What payback can commercial buildings expect?
Most retrofits pay back in 3-5 years through lower heating, cooling and fan energy.
Plate or rotary for an office AHU?
Balanced offices usually suit plate or rotary; choose rotary when humidity recovery matters, plate when contamination control is tighter.
Do hotels need special handling?
Guest rooms, laundry and pools add latent loads, so enthalpy recovery often pays; pair it with the building central plant.
Frequently Asked Questions
What payback can commercial buildings expect?
Most retrofits pay back in 3-5 years through lower heating, cooling and fan energy.
Plate or rotary for an office AHU?
Balanced offices usually suit plate or rotary; choose rotary when humidity recovery matters, plate when contamination control is tighter.
Do hotels need special handling?
Guest rooms, laundry and pools add latent loads, so enthalpy recovery often pays; pair it with the building central plant.
Specify the right heat exchanger
Our engineers size the core to your airflow, temperature and pressure-drop budget, and select plate, rotary or heat-pipe recovery by application. Read the heat exchanger guide or contact us for a specification.
Related products
Plate, wheel or pipe recovery for HVAC and ventilation.
Stationary, high-surface-area cores for air and liquid.
High-effectiveness energy recovery for large airflows.
Passive, fully separated streams for clean applications.