Table des matières
- The HWS series is a specialised oil mist and salt mist eliminator built for demanding industrial and coastal environments. It captures airborne oil aerosols from machine shops and kitchens, and salt-laden mist in seaside or offshore installations, protecting downstream equipment and improving workplace air quality.
- Frame: 304 / 316L stainless steel or aluminium—corrosion resistant and structurally rigid. Media: 304 / 316 gas–liquid mesh (demister pad) with high dust-holding capacity and a long service life. Metal media is flame-retardant, lowering fire risk compared with synthetic pads. Cleanable and reusable: the pad can be blown clean and returned to service repeatedly for permanent use.
- The HWS range is designed to comply with EN779:2012. Non-standard sizes are accepted on request, including made-to-drawing configurations.
- Model Dimensions W×H×D (mm) Rated Airflow (m³/h) Face Velocity (m/s) Initial Pressure Drop (Pa) HWS-20X10X2 492 × 238 × 46 1050 2.5 50 HWS-20X16X2 492 × 390 × 46 1720 — — HWS-20X20X2 492 × 492 × 46 2170 — — HWS24X24X2 594 × 594 × 46 3170 — — HWS25X16X2 619 × 390 × 46 2170 — — HWS25X20X2 619 × 492 × 46 2740 — —
- Large commercial and industrial kitchens. Large machine-tool processing plants and metalworking workshops. Hardware-parts foundries and casting houses where oil mist is generated. Coastal or high-salt-mist sites as a pre-filter for outdoor air intakes.
The HWS series is a specialised oil mist and salt mist eliminator built for demanding industrial and coastal environments. It captures airborne oil aerosols from machine shops and kitchens, and salt-laden mist in seaside or offshore installations, protecting downstream equipment and improving workplace air quality.
- Frame: 304 / 316L stainless steel or aluminium—corrosion resistant and structurally rigid.
- Media: 304 / 316 gas–liquid mesh (demister pad) with high dust-holding capacity and a long service life.
- Metal media is flame-retardant, lowering fire risk compared with synthetic pads.
- Cleanable and reusable: the pad can be blown clean and returned to service repeatedly for permanent use.
The HWS range is designed to comply with EN779:2012. Non-standard sizes are accepted on request, including made-to-drawing configurations.
| Model | Dimensions W×H×D (mm) | Rated Airflow (m³/h) | Face Velocity (m/s) | Initial Pressure Drop (Pa) |
|---|---|---|---|---|
| HWS-20X10X2 | 492 × 238 × 46 | 1050 | 2.5 | 50 |
| HWS-20X16X2 | 492 × 390 × 46 | 1720 | — | — |
| HWS-20X20X2 | 492 × 492 × 46 | 2170 | — | — |
| HWS24X24X2 | 594 × 594 × 46 | 3170 | — | — |
| HWS25X16X2 | 619 × 390 × 46 | 2170 | — | — |
| HWS25X20X2 | 619 × 492 × 46 | 2740 | — | — |
