CE, AHRI, Eurovent: Verifying Supplier Claims

“We are certified” is the most repeated — and most abused — phrase in Chinese HVAC exports. Here is how to verify it before you pay.

CE marking

A bare CE sticker is often a self-declaration (Module A) and proves little. For pressurised plate exchangers, ask whether the supplier complies with the Pressure Equipment Directive (PED 2014/68/EU) via a notified body. A real PED certificate names the notified body and the module.

AHRI

For air-to-air and plate recovery, check the AHRI directory (directory.ahrinet.org). Many Chinese makers now certify models to AHRI 1060 (air-to-air energy recovery) and AHRI 410. If the model is not in the directory, the claim is unverified.

Eurovent

eurovent-certification.com lists certified units with independently verified performance. A Eurovent cert is the strongest single signal of tested effectiveness for European buyers.

ISO and ASME

ISO 9001 (quality) and ISO 14001 are baseline. For pressure vessels, ASME “U”/“S” stamps matter. Always ask for the current certificate, not a photo from 2019.

The document package that actually matters

  • EN 308 or AHRI 1060 test report with the exact model and face velocity.
  • Witnessed hydrostatic test at 1.5× design pressure.
  • Material mill certificates to EN 10204 3.1 with heat numbers matching the build log.

Red flags

No test report; refuses a factory audit; generic certificate PDF with no model detail; pressure-equipment “CE” with no notified body. Walk away or insist on third-party inspection (e.g., Bureau Veritas).

Questions fréquemment posées

Q: Is a CE mark enough to trust a Chinese heat exchanger?

A: No. A self-declared CE proves little. For pressurised plate units check PED compliance via a notified body; for recovery performance check AHRI or Eurovent directories.

Q: How do I confirm AHRI or Eurovent certification?

A: Search the model in the AHRI directory (directory.ahrinet.org) or Eurovent certification site (eurovent-certification.com). If the exact model is not listed, treat the claim as unverified.

We publish our certs on request. Contactez-nous for AHRI/Eurovent/ISO documentation and mill certificates — kuns913@gmail.com / WhatsApp +86 1575335505.

Questions fréquemment posées

Is a CE mark enough to trust a Chinese heat exchanger?

No. A self-declared CE proves little. For pressurised plate units check PED compliance via a notified body; for recovery performance check AHRI or Eurovent directories.

How do I confirm AHRI or Eurovent certification?

Search the model in the AHRI directory (directory.ahrinet.org) or Eurovent certification site (eurovent-certification.com). If the exact model is not listed, treat the claim as unverified.

Spécifiez le bon échangeur

Nos ingénieurs dimensionnent le noyau selon votre débit, température et budget de perte de charge, et choisissent la récupération par plaque, rotative ou caloduc selon l'application. Lisez le guide de l'échangeur , ou contactez-nous pour une spécification.

Demander un devis

Produits connexes

Air-to-Air Heat Exchanger

Récupération par plaque, rotative ou caloduc pour le CVC et la ventilation.

Plate Heat Exchanger

Noyaux stationnaires à grande surface pour l'air et le liquide.

roue de récupération rotative

Récupération d'énergie à haute efficacité pour grands débits.

Heat Pipe Heat Exchanger

Courants passifs et totalement séparés pour applications propres.

Articles similaires

Commencez à saisir votre recherche ci-dessus et pressez Entrée pour rechercher. ESC pour annuler.

Retour en haut
Calculateurs gratuits de récupération de chaleur et outils de dimensionnement