Commercial Building Heat Recovery: Offices, Hotels, Mixed-Use

The everyday opportunity

Offices, hotels, and mixed-use buildings run ventilation around the clock with high fresh-air rates. Recovering that exhaust energy is the single biggest HVAC saving for most commercial stock.

Technology mix

Climate matters

Use climate-based selection: enthalpic cores in humid zones, sensible plate in dry ones. Keep wheel upkeep in mind if you choose rotary.

投資回収

Most commercial retrofits pay back in 3-5 years. Size with our payback method and verify with efficiency metrics.

Where the savings come from

  • Make-up air pre-conditioning – the largest load in continuously ventilated buildings.
  • Reduced boiler and chiller runtime, especially during shoulder seasons.
  • Smaller HVAC plant if recovery is specified early in design.

Specification tips

Favor sensible plate cores in dry climates and enthalpy wheels where humidity control dominates. Size the core from measured airflow, not nameplate, and keep a maintenance window for filter and wheel service.

よくある質問

What payback can commercial buildings expect?
Most retrofits pay back in 3-5 years through lower heating, cooling and fan energy.

Plate or rotary for an office AHU?
Balanced offices usually suit plate or rotary; choose rotary when humidity recovery matters, plate when contamination control is tighter.

Do hotels need special handling?
Guest rooms, laundry and pools add latent loads, so enthalpy recovery often pays; pair it with the building central plant.

よくある質問

What payback can commercial buildings expect?

Most retrofits pay back in 3-5 years through lower heating, cooling and fan energy.

Plate or rotary for an office AHU?

Balanced offices usually suit plate or rotary; choose rotary when humidity recovery matters, plate when contamination control is tighter.

Do hotels need special handling?

Guest rooms, laundry and pools add latent loads, so enthalpy recovery often pays; pair it with the building central plant.

適切な熱交換器を選定

当社のエンジニアが風量、温度、圧力損失の予算に合わせてコアを設計し、用途に応じて板式・回転式・ヒートパイプ回収を選定します。以下をお読みください: 熱交換器ガイド 、または仕様についてお問い合わせください。

見積りを依頼

関連製品

Air-to-Air Heat Exchanger

HVAC および換気向けの板式・回転式・ヒートパイプ回収。

Plate Heat Exchanger

空気と液体用の大表面積固定コア。

ロータリー熱回収ホイール

大風量向け高効率エネルギー回収。

Heat Pipe Heat Exchanger

清浄用途向けの受動的・完全分離流。

関連投稿

検索語を上に入力し、 Enter キーを押して検索します。キャンセルするには ESC を押してください。

トップに戻る
無料の熱回収計算ツールおよびサイジングツール