The site A 12,000 m2 district with a hospital wing, pool, and offices had a steady year-round heat demand and paid high grid electricity prices. A 500 kWe natural-gas CHP engine was installed to supply base-load power and capture jacket plus exhaust heat for space heating and domestic hot water. What it recovered Electrical output: […]
食品加工熱回収:プロセス熱と排熱の捕捉
A heat-rich sector Food plants bake, cook, pasteurize, and chill around the clock. Both the process air and the building exhaust carry large amounts of recoverable energy – often with moisture, grease, or particulates that demand a cleanable, robust exchanger. Technology fit Enthalpic plate or rotary wheels recover both heat and moisture from humid exhaust […]
Waste-Heat Recovery Case Study: Stack & Exhaust
The opportunity A metal-finishing plant exhausted 18,000 m3/h of 160C air from curing ovens to atmosphere – pure lost energy. The brief was to recover it for winter make-up air heating and preheat a process water loop. The solution A high-temperature plate air-to-air exchanger (stainless, rated to 200C+) transferred exhaust heat to incoming fresh air. […]
下水水源熱回収:排水エネルギーの再利用
The hidden reservoir Showers, wash-down, and process drains leave buildings at 25-40C – warm enough to be a valuable heat source. Wastewater (drain-water) heat recovery captures it before it disappears down the sewer. How it works Drain-water heat exchangers wrap a coil around or sit inside the greywater stream, pre-warming incoming cold water. Heat pumps […]
Supermarket Heat Recovery: Refrigeration + Ventilation
Two loads, one building Supermarkets and big-box retail bleed energy in two ways: refrigeration rejects heat constantly, while fresh-air ventilation (bakery, deli, entrances) demands conditioning. Heat recovery bridges them. Ventilation recovery Exhaust from the sales floor is warm and can pre-heat incoming make-up air in winter via a rotary wheel or plate exchanger. In cooling […]
製薬・クリーンルーム排気熱回収
Pharmaceutical plants and cleanrooms move huge volumes of HEPA-filtered air. Codes generally forbid recirculating exhaust that may carry contaminants, but the energy in that air can still be recovered using physically separated exchangers. Why Separation Is Mandatory GMP and HVAC codes require exhaust from containment areas to be discharged, not reused. Cross-contamination could compromise product […]
商業厨房の熱回収
Commercial kitchens run powerful hoods that throw away large amounts of hot, greasy air. Replacing it with conditioned make-up air is a major cost. Kitchen heat recovery captures the sensible heat while keeping grease and smoke out of the supply. Why Separation Matters in Kitchens Exhaust carries grease aerosol and odors, so any recovery device […]
塗装・ペイントブースの熱回収
Spray booths and curing ovens exhaust large volumes of heated air, often loaded with overspray, solvents, or moisture. Replacing that air with conditioned make-up air is expensive. Coating booth heat recovery captures the heat without mixing contaminated exhaust back into the supply. Why Separation Matters Exhaust from painting contains VOCs and particulate overspray. Cross-contamination is […]
鉱山換気熱回収:ファン負荷と結霜の低減
Underground mines move enormous airflows to dilute gases and control temperature. In cold regions, that warm exhaust is often wasted while fresh intake air must be heated to prevent downcast freezing and ice buildup. Mine ventilation heat recovery closes that loop. Why Heat Recovery Matters Underground Pre-heating intake air reduces boiler or electric heater load. […]
データセンターの熱回収:空気対空気熱交換器による冷却
Data centers consume enormous amounts of electricity for cooling. Much of that energy leaves the facility as low-grade waste heat. By using air-to-air heat exchangers, facilities can pre-cool incoming ventilation air with exhaust air, reducing the load on mechanical cooling and improving Power Usage Effectiveness (PUE). Why Data Center Heat Recovery Makes Sense Server racks […]