Recuperation de chaleur en agroalimentaire : capturer la chaleur de process et d'extraction

A heat-rich sector Food plants bake, cook, pasteurize, and chill around the clock. Both the process air and the building exhaust carry large amounts of recoverable energy – often with moisture, grease, or particulates that demand a cleanable, robust exchanger. Technology fit Enthalpic plate or rotary wheels recover both heat and moisture from humid exhaust […]

Recuperation de chaleur de source eaux usees : reutilisation de l'energie des eaux de drainage

The hidden reservoir Showers, wash-down, and process drains leave buildings at 25-40C – warm enough to be a valuable heat source. Wastewater (drain-water) heat recovery captures it before it disappears down the sewer. How it works Drain-water heat exchangers wrap a coil around or sit inside the greywater stream, pre-warming incoming cold water. Heat pumps […]

Supermarket Heat Recovery: Refrigeration + Ventilation

Two loads, one building Supermarkets and big-box retail bleed energy in two ways: refrigeration rejects heat constantly, while fresh-air ventilation (bakery, deli, entrances) demands conditioning. Heat recovery bridges them. Ventilation recovery Exhaust from the sales floor is warm and can pre-heat incoming make-up air in winter via a rotary wheel or plate exchanger. In cooling […]

Récupération de chaleur des échappements pharmaceutiques et de salles blanches

Pharmaceutical plants and cleanrooms move huge volumes of HEPA-filtered air. Codes generally forbid recirculating exhaust that may carry contaminants, but the energy in that air can still be recovered using physically separated exchangers. Why Separation Is Mandatory GMP and HVAC codes require exhaust from containment areas to be discharged, not reused. Cross-contamination could compromise product […]

Récupération de chaleur pour cabine de peinture et revêtement

Spray booths and curing ovens exhaust large volumes of heated air, often loaded with overspray, solvents, or moisture. Replacing that air with conditioned make-up air is expensive. Coating booth heat recovery captures the heat without mixing contaminated exhaust back into the supply. Why Separation Matters Exhaust from painting contains VOCs and particulate overspray. Cross-contamination is […]

Récupération de chaleur pour ventilation de mine : réduction de la charge de ventilateur et du givre

Underground mines move enormous airflows to dilute gases and control temperature. In cold regions, that warm exhaust is often wasted while fresh intake air must be heated to prevent downcast freezing and ice buildup. Mine ventilation heat recovery closes that loop. Why Heat Recovery Matters Underground Pre-heating intake air reduces boiler or electric heater load. […]

Récupération de chaleur dans les centres de données : refroidissement par échangeurs air-à-air

Data centers consume enormous amounts of electricity for cooling. Much of that energy leaves the facility as low-grade waste heat. By using air-to-air heat exchangers, facilities can pre-cool incoming ventilation air with exhaust air, reducing the load on mechanical cooling and improving Power Usage Effectiveness (PUE). Why Data Center Heat Recovery Makes Sense Server racks […]

Commencez à saisir votre recherche ci-dessus et pressez Entrée pour rechercher. ESC pour annuler.

Retour en haut
Calculateurs gratuits de récupération de chaleur et outils de dimensionnement