地熱および地中熱による空気予熱

The earth a few meters below the surface stays near constant temperature all year. That stable thermal mass can be used to pre-condition ventilation air before it reaches a building, cutting heating and cooling loads.

How Ground Coupling Works

Outdoor air is passed through a buried pipe loop (ground heat exchanger) or across a ground-coupled coil. In winter the ground warms the incoming air; in summer it cools it. The air-to-air exchanger then fine-tunes the temperature using building exhaust.

Two Common Approaches

• Earth-air heat exchanger (EAHX): A network of buried pipes that tempers fresh air directly. Simple, no refrigerant.
• Ground-source heat pump (GSHP) + recovery: A heat pump upgrades ground energy; an air-to-air core recovers exhaust heat for additional savings.

Where It Pays Off

• Extreme climates with large seasonal swings
• Buildings with high fresh-air requirements (schools, labs)
• Passive or near-zero-energy building projects
• Greenhouses and agricultural facilities

Design Cautions

• Pipe depth and length must match airflow and soil type.
• Avoid placing intakes near contaminant sources (septic, fuel tanks).
• Condensation in the buried pipe needs a drain or slope.
• Combine with a plate or heat-pipe core for best year-round performance.

よくある質問

Does the ground freeze in winter?
Below ~2 m the temperature is stable and rarely freezes; the top few meters provide the seasonal buffering.

Is it worth the excavation cost?
For large, continuous ventilation loads it often pays back in 3-6 years; for small buildings the air-to-air core alone is usually enough.

よくある質問

Does the ground freeze in winter?

Below ~2 m the temperature is stable and rarely freezes; the top few meters provide the seasonal buffering.

Is it worth the excavation cost?

For large, continuous ventilation loads it often pays back in 3-6 years; for small buildings the air-to-air core alone is usually enough.