Energy Recovery Wheel Troubleshooting: Common Faults and Fixes

Low effectiveness Cause: wheel not rotating (motor or belt failure), or condensate/fouling blocking the matrix.Fix: verify rotation and speed; wash the wheel with low-pressure water and a mild detergent; confirm belt tension. Frost or ice buildup (cold climates) Cause: exhaust-side temperature dropping below freezing.Fix: enable purge sector, reduce speed, or add preheat. See frost protection […]

Heat Exchanger Selection by Climate: Cold, Temperate, Hot-Humid

Cold climates (heating-dominated) Long, sub-zero winters make frost the enemy. Rotary wheels need purge sectors and occasional defrost; plate exchangers need bypass or preheat. Frost protection strategies are mandatory. Sensible-only recovery is usually enough because winter air is dry. Temperate climates Mild seasons with both heating and cooling loads favor balanced, all-season recovery. Plate and […]

Cleanroom HVAC Heat Recovery: Air Quality Without Wasted Energy

The contamination barrier Cleanrooms demand exceptionally high air-change rates – often 20 to 60 air changes per hour – to maintain ISO particle classes. That airflow represents a massive energy stream leaving the facility fully conditioned. Recovering it is essential, but cleanrooms add a hard constraint: supply and exhaust air must never mix. Because cross-contamination […]

Airport HVAC & Energy Recovery: Cutting Terminal Energy Use

Why terminals are energy hotspots Airports are among the most energy-intensive buildings in the commercial sector. Vast terminals run 24/7 with high fresh-air requirements, large glass facades, and constantly moving passenger loads. Heating and cooling the ventilation air alone can account for 40-60% of a terminal’s HVAC energy. Air-to-air heat recovery is the single highest-return […]

Supermarket Heat Recovery: Refrigeration + Ventilation

Two loads, one building Supermarkets and big-box retail bleed energy in two ways: refrigeration rejects heat constantly, while fresh-air ventilation (bakery, deli, entrances) demands conditioning. Heat recovery bridges them. Ventilation recovery Exhaust from the sales floor is warm and can pre-heat incoming make-up air in winter via a rotary wheel or plate exchanger. In cooling […]

위에 검색어를 입력하고 Enter 키를 눌러 검색하세요. 취소하려면 ESC 키를 누르세요.

맨 위로
무료 열회수 계산기 및 사이징 도구