Circular Economy and Reusable Heat Recovery

Circular Principles for Heat Recovery A circular-economy view treats a heat recovery ventilator as a material bank, not waste. The hierarchy is reuse, then refurbish, then recover, keep exchangers, fans, and controls in service, then recover metals and refrigerants at end of life. Design and Policy Levers Design for disassembly: modular cores, standard fasteners, documented […]

Roue de recuperation entalpique vs membrane

Choosing between an enthalpy recovery wheel and a membrane exchanger comes down to contamination risk, maintenance tolerance, and how much latent recovery you need. This comparison distills the trade-offs. Side-by-Side Factor Enthalpy Wheel Membrane Moving parts Yes (motor, seals) No Air cross-contamination Small (seal leakage) None (separate streams) Latent effectiveness 70–85% 60–80% Frost risk (cold […]

Recuperation de chaleur par pompe a chaleur haute temperature

A high-temperature heat pump (HTHP) upgrades low-grade waste heat to useful process temperatures of 80 to 120°C, replacing steam boilers or direct electric heaters in industry. This article covers selection and integration. How It Differs from a Standard Pump An HTHP uses refrigerants and compression ratios tuned for high lift. The trade-off is lower COP […]

ISO 50001 et la récupération de chaleur

ISO 50001:2018, confirmed in 2024 and updated by Amendment 1:2024 (climate-action wording), is the international standard for an Energy Management System (EnMS). It does not prescribe technologies, but its structure makes heat recovery a natural “significant energy use” to control and measure. The EnMS Cycle ISO 50001 follows Plan-Do-Check-Act: Energy review — map energy sources, […]

Commencez à saisir votre recherche ci-dessus et pressez Entrée pour rechercher. ESC pour annuler.

Retour en haut
Calculateurs gratuits de récupération de chaleur et outils de dimensionnement