ISO 50001:2018, confirmed in 2024 and updated by Amendment 1:2024 (climate-action wording), is the international standard for an Energy Management System (EnMS). It does not prescribe technologies, but its structure makes heat recovery a natural “significant energy use” to control and measure.
The EnMS Cycle
ISO 50001 follows Plan-Do-Check-Act:
- Energy review — map energy sources, uses, and consumption; identify significant energy uses (SEUs).
- Energy baseline (EnB) — reference against which improvement is measured.
- Energy performance indicators (EnPIs) — e.g. heat recovered per m³ of exhaust, or kWh saved per unit produced.
- Monitoring & management review — verify the recovery device performs as modeled.
Why Heat Recovery Is an SEU
In commercial and institutional buildings, HVAC is often the dominant SEU at 40–60% of total energy. Ventilation and process exhaust recovery therefore qualify on both axes of the SEU definition: substantial consumption と large improvement potential. Once designated, the SEU must have documented operating criteria, calibrated metering, and competent operators.
From Standard to Savings
- Define the EnPI before installing recovery: e.g. exhaust heat reclaimed (kW) normalized by outdoor temperature and occupancy.
- Apply the method from our industrial waste heat recovery case to a building exhaust stream.
- Tie recovery to a ヒートポンプ or high-temperature heat pump to lift low-grade recoverable heat to useful temperature — then track the combined EnPI.
Auditability
The standard requires demonstrated improvement, not just a system on paper. Meter the recovery loop, normalize for weather and activity, and retain records so the claim survives audit. That discipline is exactly what turns a one-off retrofit into a measured, repeatable saving.
よくある質問
Does ISO 50001 prescribe heat recovery technology?
No. It specifies an Energy Management System structure, but recovery naturally becomes a significant energy use to control and measure.
What is the Plan-Do-Check-Act cycle in ISO 50001?
Energy review, energy baseline, energy performance indicators, and monitoring with management review.
Why is HVAC often a significant energy use?
It commonly represents a large share of total building energy, and ventilation or process exhaust recovery offers large improvement potential.
How is recovery savings made auditable?
Meter the recovery loop, normalize for weather and activity, and retain records so the improvement claim survives audit.
よくある質問
Does ISO 50001 prescribe heat recovery technology?
No. It specifies an Energy Management System structure, but recovery naturally becomes a significant energy use to control and measure.
What is the Plan-Do-Check-Act cycle in ISO 50001?
Energy review, energy baseline, energy performance indicators, and monitoring with management review.
Why is HVAC often a significant energy use?
It commonly represents a large share of total building energy, and ventilation or process exhaust recovery offers large improvement potential.
How is recovery savings made auditable?
Meter the recovery loop, normalize for weather and activity, and retain records so the improvement claim survives audit.
適切な熱交換器を選定
当社のエンジニアが風量、温度、圧力損失の予算に合わせてコアを設計し、用途に応じて板式・回転式・ヒートパイプ回収を選定します。以下をお読みください： 熱交換器ガイド 、または仕様についてお問い合わせください。
関連製品
HVAC および換気向けの板式・回転式・ヒートパイプ回収。
空気と液体用の大表面積固定コア。
大風量向け高効率エネルギー回収。
清浄用途向けの受動的・完全分離流。