China Dual-Carbon (3060) Policy as a Driver for Heat Recovery

The 3060 Commitments

China has pledged to peak carbon dioxide emissions before 2030 and achieve carbon neutrality before 2060 (the ‘Dual Carbon’ or 3060 goals). Meeting them hinges on industrial energy efficiency – and waste-heat / recovery equipment sits squarely in the toolbox.

Key Policy Documents

  • 2024-2025 Energy Conservation and Carbon Reduction Action Plan (State Council, Doc. Guo Fa [2024] No. 12) – a cross-sector plan that explicitly calls for strengthening waste-heat and waste-pressure utilisation and optimising energy systems.
  • Steel Industry Energy Conservation and Carbon Reduction Special Action Plan (NDRC et al., Doc. Fa Gai Huan Zi [2024] No. 730) – targets ‘whole-process waste-energy utilisation’, higher self-generation from waste energy, and wider use of sinter and coke-oven waste-heat power.
  • Sector plans for refining, synthetic ammonia and cement – the same five ministries jointly stress recovery of waste heat, steam and pressure.

From Voluntary to Mandatory

From August 2025, the updated industrial energy-saving supervision rules bring waste-heat recovery systems into mandatory inspection for key energy-using units. Combined with green finance, tax preferences for resource utilisation, and step electricity pricing by efficiency, the incentive structure now pushes recovery investment rather than discouraging it.

Park-Level Networks

A notable trend is centralised, park-level waste-heat supply: in 2025 more than 200 new park heating/cooling networks were commissioned, adding several GW of recovered capacity, concentrated in East and North China. These networks aggregate low-grade heat from factories for district heating and process use.

Implication for Recovery Equipment

Policy is the single largest demand driver for air-to-air, plate, heat-pipe and run-around recovery equipment in China. For engineers specifying projects, aligning designs with the national efficiency benchmarks in these plans is increasingly a compliance requirement, not just a cost-saving option.

자주 묻는 질문

What are China’s Dual Carbon, or 3060, goals?
China pledged to peak carbon dioxide emissions before 2030 and reach carbon neutrality before 2060, with industrial energy efficiency as the central lever.

Which policies drive waste-heat recovery in China?
The 2024 to 2025 Energy Conservation and Carbon Reduction Action Plan and the steel-sector special action plan both explicitly call for stronger waste-heat and waste-pressure utilization.

Is waste-heat recovery now mandatory in China?
From August 2025, updated industrial energy-saving supervision rules bring waste-heat recovery systems into mandatory inspection for key energy-using units.

What are park-level waste-heat networks?
They are centralized networks that aggregate low-grade heat from factories for district heating and process use; over 200 new ones were commissioned in 2025.

자주 묻는 질문

What are China's Dual Carbon, or 3060, goals?

China pledged to peak carbon dioxide emissions before 2030 and reach carbon neutrality before 2060, with industrial energy efficiency as the central lever.

Which policies drive waste-heat recovery in China?

The 2024 to 2025 Energy Conservation and Carbon Reduction Action Plan and the steel-sector special action plan both explicitly call for stronger waste-heat and waste-pressure utilization.

Is waste-heat recovery now mandatory in China?

From August 2025, updated industrial energy-saving supervision rules bring waste-heat recovery systems into mandatory inspection for key energy-using units.

What are park-level waste-heat networks?

They are centralized networks that aggregate low-grade heat from factories for district heating and process use; over 200 new ones were commissioned in 2025.

적합한 열교환기 선정

당사 엔지니어가 풍량, 온도, 압력 손실 예산에 맞춰 코어를 설계하고, 적용에 따라 판형·회전식·히트파이프 회수를 선택합니다. 다음을 읽으세요: 열교환기 가이드 , 또는 사양 관련 문의를 주세요.

견적 요청

관련 제품

Air-to-Air Heat Exchanger

HVAC 및 환기용 판형·회전식·히트파이프 회수.

Plate Heat Exchanger

공기 및 액체용 대면적 고정 코어.

회전식 열회수 휠

대풍량용 고효율 에너지 회수.

Heat Pipe Heat Exchanger

청정 적용을 위한 수동적·완전 분리 유동.

관련 게시물

위에 검색어를 입력하고 Enter 키를 눌러 검색하세요. 취소하려면 ESC 키를 누르세요.

맨 위로
무료 열회수 계산기 및 사이징 도구