Membrane Energy Recovery Ventilation

Membrane energy recovery ventilation (MERV) uses a stationary, non-rotating polymer membrane core to transfer both sensible and latent heat between supply and exhaust airstreams. Unlike a rotating energy recovery wheel, a membrane exchanger has no moving parts and physically separates the two airstreams, which eliminates the carryover of moisture, odors, and particulates that can occur with desiccant wheels.

How a Membrane Core Works

The core is built from thin, water-vapor-permeable membranes stacked into counter-flow or cross-flow channels. Sensible heat moves through the membrane by conduction, while water vapor diffuses along its partial-pressure gradient. The result is total (enthalpy) recovery without any air mixing.

Where Membrane Recovery Fits Best

• Laboratories and cleanrooms where cross-contamination must be avoided — see cleanroom HVAC heat recovery 및 laboratory heat recovery.
• Hospitals and clinics with strict infection-control requirements.
• Humid climates where latent recovery matters as much as temperature recovery.

Typical Performance

Metric	일반적 범위
현열 효율	70–85%
Latent (enthalpy) effectiveness	60–80%
Pressure drop per side	100–250 Pa

Membrane vs Desiccant Wheel

A desiccant wheel can deliver deeper dehumidification but needs regeneration energy and carries a frost or condensation risk in cold exhaust. A membrane core recovers latent heat passively and is simpler to maintain. For a side-by-side comparison, read enthalpy recovery wheel vs membrane.

Because membranes have no rotating seal, they avoid the leakage and imbalance issues covered in energy recovery wheel troubleshooting, making them a low-maintenance choice for critical ventilation.

Selecting and Sizing a Membrane Core

When specifying a membrane exchanger, size it on the design outdoor-air and exhaust flow rather than a nominal figure, and confirm the pressure drop fits the available fan head. Counter-flow cores generally reach higher effectiveness than cross-flow for the same face area, so a smaller counter-flow unit can meet the same target. Because the membrane is the only barrier between airstreams, periodic visual inspection for dust or condensate staining is the main upkeep; most cores wash with mild detergent, though manufacturer guidance should be followed to avoid damaging the selective layer. In cold climates, exhaust leaving below freezing can frost the membrane, so a summer bypass or a low-temperature strategy keeps the core effective. Integrating the module as a balanced supply-and-exhaust package also helps hold the building near neutral pressure, which protects the envelope and adjacent exhaust systems.

자주 묻는 질문

What is the main advantage of a membrane energy recovery ventilator over a rotating wheel?
It has no moving parts and completely separates the supply and exhaust airstreams, eliminating cross-contamination and the carryover of moisture, odors, and particulates that rotating wheels can exhibit.

Does a membrane core recover latent heat as well as sensible heat?
Yes. Water vapor diffuses through the membrane along its partial-pressure gradient, so total enthalpy recovery is achieved without any mixing of the two airstreams.

How should a membrane core be maintained?
Periodic inspection for fouling and washing with mild detergent as the manufacturer directs; there are no bearings, seals, or rotating parts to service.

Can membrane recovery be used in cold climates?
Yes, but frost can form on the exhaust side below freezing, so a summer bypass or a low-temperature strategy is used to keep the core effective.

자주 묻는 질문

What is the main advantage of a membrane energy recovery ventilator over a rotating wheel?

It has no moving parts and completely separates the supply and exhaust airstreams, eliminating cross-contamination and the carryover of moisture, odors, and particulates that rotating wheels can exhibit.

Does a membrane core recover latent heat as well as sensible heat?

Yes. Water vapor diffuses through the membrane along its partial-pressure gradient, so total enthalpy recovery is achieved without any mixing of the two airstreams.

How should a membrane core be maintained?

Periodic inspection for fouling and washing with mild detergent as the manufacturer directs; there are no bearings, seals, or rotating parts to service.

Can membrane recovery be used in cold climates?

Yes, but frost can form on the exhaust side below freezing, so a summer bypass or a low-temperature strategy is used to keep the core effective.