Waste Heat Recovery Across China Process Industries

The Resource at Stake

China generates the largest industrial waste-heat resource on the planet – equivalent to more than 1 billion tonnes of standard coal per year, of which over 300 million tonnes are economically recoverable. Yet comprehensive utilisation runs at only about 32%, against roughly 56% in the EU, signalling a large efficiency gap.

Steel

The steel sector alone holds about 350 million tonnes of standard-coal equivalent in waste heat, but utilisation is below 35%, and for low-to-mid-temperature streams below 300C it is under 5%. Steel accounts for around 16% of national energy use, so recovery is a national priority: the 2024 steel action plan targets raising self-generated power from waste energy by more than 3 percentage points.

Cement, Chemical and Glass

• Cement – waste-heat power generation (WHG) penetration exceeds 90%, making it the most matured recovery application in China.
• Chemical and petrochemical – high-pressure steam, purge gas and waste-heat/pressure recovery are widely applied; the sector contributes about 19% of national WHG capacity.
• Glass and non-ferrous metals – kiln and smelting off-gas recovery is expanding, though coverage remains lower than cement.

Recovery Capacity and Equipment

China’s waste-heat power capacity surpassed 45 GW in 2025, with steel (~38%), cement (~27%) and chemical (~19%) dominating. Leading Chinese engineering firms supply WHG systems and heat-recovery equipment. Air-to-air plate exchangers and heat pipes play a growing role in capturing low-temperature streams (30-120C) that were previously vented, often feeding the same recovery loops described in this Encyclopedia.

Why It Matters for Recovery Equipment

Most untapped potential sits in low-temperature waste heat – exactly the band where compact air-to-air and heat-pipe exchangers are most cost-effective. As policy tightens, demand for these units across steel, cement, chemical and park-level heating networks is set to rise.

자주 묻는 질문

How much industrial waste heat does China generate?
China’s industrial waste-heat resource exceeds one billion tonnes of standard coal equivalent per year, with over 300 million tonnes economically recoverable but only about 32 percent utilized.

Which sectors offer the most waste-heat recovery potential?
Steel holds about 350 million tonnes of coal-equivalent with low utilization, while cement, chemical, glass, and non-ferrous metals add large and partly tapped streams.

Why is low-temperature waste heat important?
Most untapped potential sits below 300 degrees C, exactly the band where compact air-to-air and heat-pipe exchangers are most cost-effective and were previously vented.

What role do air-to-air exchangers play in Chinese recovery?
Plate exchangers and heat pipes capture low-temperature streams of 30 to 120 degrees C, often feeding the same recovery loops used across process and district heating.

자주 묻는 질문

How much industrial waste heat does China generate?

China's industrial waste-heat resource exceeds one billion tonnes of standard coal equivalent per year, with over 300 million tonnes economically recoverable but only about 32 percent utilized.

Which sectors offer the most waste-heat recovery potential?

Steel holds about 350 million tonnes of coal-equivalent with low utilization, while cement, chemical, glass, and non-ferrous metals add large and partly tapped streams.

Why is low-temperature waste heat important?

Most untapped potential sits below 300 degrees C, exactly the band where compact air-to-air and heat-pipe exchangers are most cost-effective and were previously vented.

What role do air-to-air exchangers play in Chinese recovery?

Plate exchangers and heat pipes capture low-temperature streams of 30 to 120 degrees C, often feeding the same recovery loops used across process and district heating.