플레이트 vs 로터리 vs 히트파이프: 열교환기 선택법

Choosing the right air-to-air heat exchanger depends on airflow, temperature, humidity, installation space, and contamination risk. This guide compares the three most common technologies.

Quick Comparison

Feature	Plate Exchanger	Rotary Wheel	히트 파이프
효율	High (70–85 %)	High (75–85 %)	Moderate (50–70 %)
가동 부품	없음	Motor/bearings	없음
Cross-contamination	Very low	Low with purge	Zero
Moisture transfer	Sensible only*	Yes (enthalpy)	No
유지보수	Low	중간	Very low
Distance flexibility	Limited	Limited	높음

*Special enthalpy plates can transfer limited moisture.

Choose Plate When…

• You need high sensible efficiency with low maintenance.
• The air streams are close together.
• Cross-contamination must be minimized.
• The application is drying, data center cooling, or general ventilation.

Choose Rotary Wheel When…

• You need both heat and humidity recovery.
• Airflow is large and centralized.
• Installation space allows a round wheel housing.

Choose Heat Pipe When…

• The supply and exhaust ducts are separated.
• Zero cross-contamination is required.
• The environment is dusty, corrosive, or explosive.

Selection by Application

• Mine ventilation: Heat pipe or plate
• Data centers: Plate (sensible, no moisture transfer)
• Swimming pools / ice rinks: 회전식 엔탈피 휠
• Industrial drying: Plate (sensible, no moisture return)
• Kitchen / lab exhaust: Run-around coil or heat pipe

자주 묻는 질문

Which technology is most reliable?
All three are reliable when correctly applied. Plate exchangers generally have the lowest maintenance and longest life.

Can I combine technologies?
Yes. For example, a plate exchanger can be used for primary recovery and a heat pipe for a remote exhaust point.

Selection Workflow

1. Fix the duty point: supply and exhaust airflow, temperature difference, and allowed pressure drop.
2. Decide sensible vs enthalpy from climate and moisture load.
3. Score contamination risk – dusty, greasy or hazardous exhaust points to plate or heat pipe.
4. Check geometry: close ducts favor plate or wheel; separated ducts favor heat pipe or run-around coil.
5. Confirm footprint, maintenance access and budget.

Common Pitfalls

• Specifying a rotary wheel where winter humidity must stay low – use sensible plate instead.
• Forgetting purge sector and seals on wheels, which control cross-leakage.
• Undersizing plate spacing in greasy air, which clogs fast.

자주 묻는 질문

Which technology is most reliable?

All three are reliable when correctly applied. Plate exchangers generally have the lowest maintenance and longest life.

Can I combine technologies?

Yes. For example, a plate exchanger can be used for primary recovery and a heat pipe for a remote exhaust point.